Products
-
Plumboss Stack Kit | ATK02
THE TIME AND MONEY SAVER The stack test kit is the perfect partner for the plumBOSS Air Test Kit. The Stack Test Kit is great when you are air testing a block of units or flats. The Stack Test Kit is used in the exact same manner as the Rufin Test Kit, when you have reached your desired pressure simply turn the mini ball valve and move on to the next test. This process means that Save valuable time, your time Air Test Kit can be used on multiple unit tests Air Test Kit can be used on multiple jobs
$0.01
-
Plumboss Stainless Poly Squeeze-off Tool | PESS01
Made in Australia from precision machined stainless steel and brass for smooth action & durability. Ideal for squeezing off poly gas & water lines. 0-32 mm capacity. Secured bottom bar. A must have tool for repair and emergency work.
$0.01
-
Plumboss Stainless Steel Inner / Outer Reamer 10–54mm | SSR10-54
Plumboss Stainless Steel Inner / Outer Reamer 10–54mm Fast, clean deburring for copper and stainless tubing The Plumboss Stainless Steel Inner / Outer Reamer is designed to deliver fast, clean deburring and beveling of copper and stainless steel tubing. It removes internal burrs and sharp edges created during cutting, helping ensure smooth pipe ends that are ready for joining, brazing or press fitting. Engineered for professional plumbing and mechanical installations, the tool performs both inner and outer reaming in one compact design. Its hardened steel construction provides durability for repeated use on site while maintaining clean, consistent results across a wide range of tube sizes.
$0.01
-
Plumboss Stainless Steel Test Pump Only | SSTP50BO
STAINLESS STEEL HAND TEST PUMP Stainless Test Buckets The SSTP50 Test Pump features a 50bar (726psi) pressure gauge. The 12L water bucket is made of stainless steel and has a 1.5m hose attached. This unit has a maximum pressure of 5000kpa
$0.01
-
Plumboss Stainless Steel Test Pump Repair Kit | SSTPR
Plumboss Stainless Steel Test Pump Repair Kit | SSTPRReplacement parts kit for the Plumboss SSTP50 stainless steel test pump.Kit includes 1 piston valve 2 valve stem assemblies 1 filter 2 ball bearings 2 large O-rings 2 small O-rings 1 dust seal
$0.01
-
Plumboss Strap Wrench 10–63mm - SW12A | RD02248
Strap wrench for pipe This Strap Wrench is designed for gripping and turning pipe, fittings and polished surfaces without causing damage. The flexible strap provides a secure, non-marking grip, making it ideal for plastic pipe, filters and other smooth or delicate surfaces. Built for versatility, this wrench conforms to irregular shapes and helps deliver controlled grip when tightening or loosening components. Ductile iron handle and a strong polyester strap for durability and long service life. Strap wrench range: Item Code Pipe Capacity Tube Capacity Handle Length Weight Inches Nominal Actual Ø mm Inches Nominal Actual Ø mm in mm lbs kg RD02248 3/8 – 2 10 - 63 3 1/2 90 12 305 1.6 0.7 RD02255 1 – 12 33 - 305 12 300 18 458 2.9 1.3 RD02236 2 - 18 60 - 457 20 508 24 610 5.1 2.3
$0.01
-
Plumboss Strap Wrench 33–305mm - SW18A48 | RD02255
Strap wrench for large diameter pipe This Strap Wrench is designed for gripping and turning pipe, fittings and polished surfaces without causing damage. The flexible strap provides a secure, non-marking grip, making it ideal for plastic pipe, filters and other smooth or delicate surfaces. Built for larger diameter applications, the extra-long strap provides increased reach and leverage when working on bigger pipe sizes. The strap conforms to irregular shapes, allowing controlled grip when tightening or loosening components across a wide range of applications. Strap wrench range: Item Code Pipe Capacity Tube Capacity Handle Length Weight Inches Nominal Actual Ø mm Inches Nominal Actual Ø mm in mm lbs kg RD02248 3/8 – 2 10 - 63 3 1/2 90 12 305 1.6 0.7 RD02255 1 – 12 33 - 305 12 300 18 458 2.9 1.3 RD02236 2 - 18 60 - 457 20 508 24 610 5.1 2.3
$0.01
-
Plumboss Strap Wrench SW24A72 | RD02236
Strap wrench for large diameter pipe The Plumboss Strap Wrench is designed for gripping and turning pipe, fittings and polished surfaces without causing damage. The flexible strap provides a secure, non-marking grip, making it ideal for plastic pipe, filters and other smooth or delicate surfaces. Built for larger diameter applications, the extra-long strap allows increased reach and leverage when working on large pipe sizes. The durable construction and strong polyester strap provide reliable performance across a wide range of applications, including irregular shapes where traditional wrenches may not be suitable. Strap wrench range: Item Code Pipe Capacity Tube Capacity Handle Length Weight Inches Nominal Actual Ø mm Inches Nominal Actual Ø mm in mm lbs kg RD02248 3/8 – 2 10 - 63 3 1/2 90 12 305 1.6 0.7 RD02255 1 – 12 33 - 305 12 300 18 458 2.9 1.3 RD02236 2 - 18 60 - 457 20 508 24 610 5.1 2.3
$0.01
-
Plumboss String Line 100m Fluoro | SL100F
Product Code Description SL50F String Line 50m Fluoro SL50W String Line 50m White SL100F String Line 100m Fluoro SL100W String Line 100mm White
$0.01
-
Plumboss String Line 100m White | SL100W
Strong field-tested line Product Code Description SL50F String Line 50m Fluoro SL50W String Line 50m White SL100F String Line 100m Fluoro SL100W String Line 100mm White
$0.01
-
Plumboss String Line 50m Fluoro | SL50F
Strong field-tested line Product Code Description SL50F String Line 50m Fluoro SL50W String Line 50m White SL100F String Line 100m Fluoro SL100W String Line 100mm White
$0.01
-
Plumboss String Line 50m White | SL50W
Strong field-tested line Product Code Description SL50F String Line 50m Fluoro SL50W String Line 50m White SL100F String Line 100m Fluoro SL100W String Line 100mm White
$0.01
-
$0.01
-
$0.01
-
$0.01
-
Plumboss T-Drill T-54c - Cordless Branchforming Kit - 13-54mm (1/2 -2in) Branches | BFK54CU
T-54c Cordless Portable Tee Forming Machine The revolutionary plumBOSS T-Drill is the only portable powered branch forming tool in the world. This tool forms branches in tubes for attaching other tubes, instead of using a t-piece. This powerful & innovative tool can pull branches in seconds, saving you hours of time soldering or press fitting in t-pieces. Using the t-drill means only one soldered joint, resulting in dramatically less chance for leaks and call backs. This kit includes heads that cut the pilot hole in the copper tube, then quickly use the innovative forming pins to create a perfect branch. There is no need to even heat the tube. The all new T-54c version uses the latest battery technology for a lightweight, easy to use machine that can form 40 54mm branches on one charge. Capacity of up to 54 mm (NS 2″) out of run tubes up to 108 mm (NS 4″) (with optional retrofit kit even up to 168.3 mm run tubes) Battery-operated for unparalleled portability Ideal for plumbing, HVAC, and special applications Compared to the installed cost of a tee fitting, the T-DRILL joint can improve your profit by up to 70% With the T-54c, you can experience superior quality that resembles commercial tee fittings. The T-54c is designed not only to match industry standards but also to enhance your profitability. By eliminating two brazed joints and associated fitting costs, this innovative solution ensures both efficiency and cost-effectiveness for your operations. Experience the power of the heavy-duty T-DRILL T-54c – a cordless, portable, easy-to-use, and low-noise tee forming machine crafted for professionals. Increase efficiency in your work with the T-Drill solution designed for effortlessly creating tee joints in main run tubes. Branch tubing outside diameter Run tube outside diameter mm 85/16" 103/8" 121/2" 155/8" 183/4" 227/8" 281 1/8" 351 3/8" 421 5/8" 542 1/8" 15mm(5/8") 0.8 1 1.2 1.2 - - - - - - 18mm(3/4") 0.8 1 1.2 1.5 1.2 - - - - - 22mm(7/8") 0.8 1 1.2 1.5 1.5 1.5 - - - - 28mm(1 1/8") 0.8 1 1.2 1.5 1.5 1.5 1.5 - - - 35mm(1 3/8") 0.8 1 1.2 1.5 1.5 1.5 1.5 1.5 - - 42mm(1 5/8") 0.8 1 1.2 1.5 1.5 1.5 1.5 2 2 - 54mm(2 1/8") 0.8 1 1.2 1.5 1.5 1.5 1.5 2 2 2 64mm(2 1/2") 0.8 1 1.2 1.5 1.5 1.5 1.5 2.5 2.5 2.5 76mm(3") 0.8 1 1.2 1.5 1.5 1.5 1.5 2.5 2.5 2.5 88.9mm(3 1/2") 0.8 1 1.2 1.5 1.5 1.5 1.5 2.5 2.5 2.5 108mm(4") 0.8 1 1.2 1.5 1.5 1.5 1.5 2.5 2.5 2.5 168.3mm With optional retrofit kit The T-Drill Process: Drilling of the pilot hole Extension of the forming pins Finished collar DO IT WITH T-DRILL: Cut costs - Improve quality - Increase profit No T-fittings No costly inventories No tube cutting Only one brazed joint Minimized inspection cost Tee ratio variation flexibility Smaller risk of leakage or call-backs Optimizes flow-characteristics
$1.00
-
Plumboss T-Drill T-54c - Cordless Branchforming Machine - 13-54mm (1/2 -2in) Branches | TD5331091
T-54c Cordless Portable Tee Forming Machine The revolutionary plumBOSS T-Drill is the only portable powered branch forming tool in the world. This tool forms branches in tubes for attaching other tubes, instead of using a t-piece. This powerful & innovative tool can pull branches in seconds, saving you hours of time soldering or press fitting in t-pieces. Using the t-drill means only one soldered joint, resulting in dramatically less chance for leaks and call backs. This kit includes heads that cut the pilot hole in the copper tube, then quickly use the innovative forming pins to create a perfect branch. There is no need to even heat the tube. The all new T-54c version uses the latest battery technology for a lightweight, easy to use machine that can form 40 54mm branches on one charge. Capacity of up to 54 mm (NS 2″) out of run tubes up to 108 mm (NS 4″) (with optional retrofit kit even up to 168.3 mm run tubes) Battery-operated for unparalleled portability Ideal for plumbing, HVAC, and special applications Compared to the installed cost of a tee fitting, the T-DRILL joint can improve your profit by up to 70% With the T-54c, you can experience superior quality that resembles commercial tee fittings. The T-54c is designed not only to match industry standards but also to enhance your profitability. By eliminating two brazed joints and associated fitting costs, this innovative solution ensures both efficiency and cost-effectiveness for your operations. Experience the power of the heavy-duty T-DRILL T-54c – a cordless, portable, easy-to-use, and low-noise tee forming machine crafted for professionals. Increase efficiency in your work with the T-Drill solution designed for effortlessly creating tee joints in main run tubes. Branch tubing outside diameter Run tube outside diameter mm 85/16" 103/8" 121/2" 155/8" 183/4" 227/8" 281 1/8" 351 3/8" 421 5/8" 542 1/8" 15mm(5/8") 0.8 1 1.2 1.2 - - - - - - 18mm(3/4") 0.8 1 1.2 1.5 1.2 - - - - - 22mm(7/8") 0.8 1 1.2 1.5 1.5 1.5 - - - - 28mm(1 1/8") 0.8 1 1.2 1.5 1.5 1.5 1.5 - - - 35mm(1 3/8") 0.8 1 1.2 1.5 1.5 1.5 1.5 1.5 - - 42mm(1 5/8") 0.8 1 1.2 1.5 1.5 1.5 1.5 2 2 - 54mm(2 1/8") 0.8 1 1.2 1.5 1.5 1.5 1.5 2 2 2 64mm(2 1/2") 0.8 1 1.2 1.5 1.5 1.5 1.5 2.5 2.5 2.5 76mm(3") 0.8 1 1.2 1.5 1.5 1.5 1.5 2.5 2.5 2.5 88.9mm(3 1/2") 0.8 1 1.2 1.5 1.5 1.5 1.5 2.5 2.5 2.5 108mm(4") 0.8 1 1.2 1.5 1.5 1.5 1.5 2.5 2.5 2.5 168.3mm With optional retrofit kit The T-Drill Process: Drilling of the pilot hole Extension of the forming pins Finished collar DO IT WITH T-DRILL: Cut costs - Improve quality - Increase profit No T-fittings No costly inventories No tube cutting Only one brazed joint Minimized inspection cost Tee ratio variation flexibility Smaller risk of leakage or call-backs Optimizes flow-characteristics
$1.00
-
Plumboss Telescopic Basin Wrench 3/8in-1 1/4in cap | SBW125
Plumboss Telescopic Basin Wrench – 3/8 in to 1-1/4 in Capacity Telescopic Basin Wrench for Hard-to-Reach Fittings The Plumboss Telescopic Basin Wrench is designed for professional trade use where access to nuts and fittings in confined or hard-to-reach spaces is required, such as under basins and sinks. The telescopic handle allows quick adjustment for different working positions, making it easier to reach fasteners without awkward body positioning. This basin wrench features a reversible jaw head that securely grips nut sizes from 3/8 inch to 1-1/4 inch, covering the common range of basin and faucet fittings. The robust construction delivers dependable performance in plumbing, maintenance, and installation applications. Built with professional use in mind, the Plumboss Telescopic Basin Wrench provides improved leverage and control in tight spaces, helping tradespeople work faster and more comfortably.
$0.01
-
Plumboss Telstra Pit Key | TPK01
Plumboss Telstra Pit Key Purpose-built key for lifting Telstra pit lids The Australian-made Telstra Pit Key is purpose-built for safely removing Telstra pit lids and covers on site. Its durable, fabricated construction is designed to resist bending or fracture under load, delivering reliable performance in demanding conditions. Finished in a highly corrosion-resistant zinc plating, the tool is built for long service life. A built-in safety lock ensures secure engagement during lifting, improving control and reducing the risk of slippage when accessing underground services.
$0.01
-
Plumboss Test Plug Pressed Steel 13 inch (330mm) | 13PS
PRESSED STEEL TEST PLUGS - Pipe Plug Single Seal 13" (330mm) Used as Pipe Stops, Pressure Testing and for Pipe Purging Product Code Description Min/Max - (mm) BSP Outlet Size 1 1/2PS TEST PLUG PRESSED STEEL 1 1/2in (38mm) 36-48 1½in 2PS TEST PLUG PRESSED STEEL 2in (50mm) 49-60 ½in 2 1/2ps TEST PLUG PRESSED STEEL 2 1/2in (65mm) 61-75 ½in 3PS TEST PLUG PRESSED STEEL 3in (75mm) 73-85 ½in 4PS TEST PLUG PRESSED STEEL 4in (100mm) 94-110 ½in 5PS TEST PLUG PRESSED STEEL 5in (125mm) 121-138 ½in 6PS TEST PLUG PRESSED STEEL 6in (150mm) 146-163 ½in 7PS TEST PLUG PRESSED STEEL 7in (175mm) 170 - 195 1in 8PS TEST PLUG PRESSED STEEL 8in (200mm) 191-211 1in 9PS TEST PLUG PRESSED STEEL 9in (225mm) 216-235 1in 10PS TEST PLUG PRESSED STEEL 10in (250mm) 244-260 1in 12PS TEST PLUG PRESSED STEEL 12in (300mm) 296-314 1in 15PS TEST PLUG PRESSED STEEL 15in (375mm) 365-400 1in 18PS TEST PLUG PRESSED STEEL 18in (450mm) 440-475 1in Operating Pressure Sizes This is a guide to the maximum back pressure for the different types and sizes of test plugs. These pressures will vary depending on cleanliness and condition of pipe bore and ambient temperature. ½” (12.5mm) to (30mm) 30 psi 1½” (40mm) to (300mm) 7 psi 13” (325mm) to (1200mm) 5 psi Over 40” (1200mm) 3 psi
$0.01
-
Plumboss Threaded Rod Cutter 10mm | NKM10
Threaded rod cutters allow you to cut threaded rod without damaging the thread ridge on the cut side. This of course saves time used on tedious work. The blades, jaws and body are made of alloy steel and are completely heat treated in order to assure sharpness of the blades and long durability of the tool. Rod Cutter's are available in 10mm and 12mm.
$0.01
-
Plumboss Threaded Rod Cutter Spare Die 10mm | M10D
Spare die to suit NKM10 & NKM12 Threaded Rod CuttersReplacement dies available in 6mm,8mm,10mm,12mm.
$0.01
-
Plumboss Threaded Rod Cutter Spare Die 12mm | M12D
Spare die to suit NKM10 & NKM12 Threaded Rod CuttersReplacement dies available in 6mm,8mm,10mm,12mm.
$0.01
-
Plumboss Threaded Rod Cutter Spare Die 6mm | M6D
Spare die to suit NKM10 & NKM12 Threaded Rod CuttersReplacement dies available in 6mm,8mm,10mm,12mm.
$0.01
You have seen 624 out of 756 products