Products

764 products

  • Feed Tap Base Machine - FTB | RD09160

    Feed Tap Base Machine - FTB | RD09160

    The feed tap machine is a great waterworks tool that drills through PVC, PE, cast iron and ductile iron pipe while under pressure using a ball valve or ferrule inserted into a tapping saddle. The compact design, featuring a separate, independent feed control for advancing the heavy-duty shell cutter into the pipe, allows the user to easily complete the tap using a drill (not included) for cast and ductile iron, or manual power (7/16” wrench) for PVC/PE and other plastic pipe. The FTB Feed Tap consists of the base unit which allows the user to purchase shell cutters and adapters as required. Kit Includes: 1 x FTB Base Machine 1 x Carry Case 1 x Ratchet Wrench 1 x Pliers 1 x Adjustable Wrench 1 x Allan Key 1 x 1/4" Pilot Drill 1 x 1/4" Coupon Retaining Drill Bit 1 x Bottle Tapping Compound 1 x Set of 3/8" Magnetic Coupon Retainer Set 1 x Set of 1/4" Magnetic Coupon Retainer Set

    $0.01

  • Female Coupling -3/4 inch Cable 8511 | M728F

    $0.01

  • freezeBOSS Extreme Pipe Freezing Kit 8–28mm | FBI8-28

    freezeBOSS Extreme Pipe Freezing Kit 8–28mm | FBI8-28

    freezeBOSS Extreme Pipe Freezing Kit 8–28mm Fast, reliable pipe freezing kit for creating temporary ice plugs without shutting off mains The Plumboss freezeBOSS Extreme Pipe Freezing Kit is designed to freeze water inside pipes to form a strong, temporary plug, allowing repairs or extensions without shutting off the mains. Suitable for steel, copper and plastic pipes, it delivers a powerful -50°C freeze, creating ice plugs that hold pressures over 230psi and last up to 45 minutes. This Australian-made kit includes a specially formulated freezeBOSS refrigerant and two cost-effective disposable freezing jackets, making it a practical and efficient solution for on-site work. The fast-acting system typically forms a freeze within minutes, allowing plumbers to proceed quickly with maintenance or installation tasks while keeping downtime to a minimum. Designed for ease of use, the kit provides reliable performance across common pipe sizes, making it ideal for emergency repairs and routine plumbing work. With no need to drain systems, it improves efficiency and reduces disruption on-site, making it an essential tool for professional plumbers. Kit Contains: 1 x freezeBOSS Intense 415ml can 2 x Disposable 8-28mm freezing Jackets Ice plug duration is approximately 45 minutes 1 intense can will give you 2 freezes up to 15mm or 1 freeze up to 25mm Material Compatibility: Steel Copper Plastic Application Coverage: 2 x freezes up to 15mm 1 x freeze up to 25–28mm

    $0.01

  • FT 1 1/2 & 2 in PVC/PE Shell Cutter Adapter - FTPLAA | RD04423

    $0.01

  • FT Arbor Assembly used w/1 7/16 & 1 3/4in - FTAA | RD09113

    $0.01

  • FT Heavy Duty Shell Cutter 1 3/4 in- FTSC1750 | RD99138

    FT Heavy Duty Shell Cutter 1 3/4 in- FTSC1750 | RD99138

    Shell cutters cut up to 2" deep and fit most standard arbors. These shell cutters are recommended for cast and ductile iron, in use with Feed Tap machines. The attachment thread is 1/2 - 20. Each shell cutter tooth has carbide inserts which long outlast bi-metal teeth. CODE SHELL SIZE (inches) WEIGHT lbs kg FTSC688 11/16 0.09 0.04 FTSC875 7/8 0.15 0.07 FTSC1438 1 7/16 0.41 0.19 FTSC1750 1 3/4 0.57 0.26

    $0.01

  • FT Heavy Duty Shell Cutter 1 7/16in - FTSC1438 | RD99137

    FT Heavy Duty Shell Cutter 1 7/16in - FTSC1438 | RD99137

    Shell cutters cut up to 2" deep and fit most standard arbors. These shell cutters are recommended for cast and ductile iron, in use with Feed Tap machines. The attachment thread is 1/2 - 20. Each shell cutter tooth has carbide inserts which long outlast bi-metal teeth. CODE SHELL SIZE (inches) WEIGHT lbs kg FTSC688 11/16 0.09 0.04 FTSC875 7/8 0.15 0.07 FTSC1438 1 7/16 0.41 0.19 FTSC1750 1 3/4 0.57 0.26

    $0.01

  • FT Heavy Duty Shell Cutter 11/16 in - FTSC688 | RD99132

    FT Heavy Duty Shell Cutter 11/16 in - FTSC688 | RD99132

    Shell cutters cut up to 2" deep and fit most standard arbors. These shell cutters are recommended for cast and ductile iron, in use with Feed Tap machines. The attachment thread is 1/2 - 20. Each shell cutter tooth has carbide inserts which long outlast bi-metal teeth. CODE SHELL SIZE (inches) WEIGHT lbs kg FTSC688 11/16 0.09 0.04 FTSC875 7/8 0.15 0.07 FTSC1438 1 7/16 0.41 0.19 FTSC1750 1 3/4 0.57 0.26

    $0.01

  • FT Heavy Duty Shell Cutter 7/8 in - FTSC875 | RD99134

    FT Heavy Duty Shell Cutter 7/8 in - FTSC875 | RD99134

    Shell cutters cut up to 2" deep and fit most standard arbors. These shell cutters are recommended for cast and ductile iron, in use with Feed Tap machines. The attachment thread is 1/2 - 20. Each shell cutter tooth has carbide inserts which long outlast bi-metal teeth. CODE SHELL SIZE (inches) WEIGHT lbs kg FTSC688 11/16 0.09 0.04 FTSC875 7/8 0.15 0.07 FTSC1438 1 7/16 0.41 0.19 FTSC1750 1 3/4 0.57 0.26

    $0.01

  • Guillotine Pipe Cutter - HPC8+ | RD04609

    Guillotine Pipe Cutter - HPC8+ | RD04609

    Manual, guillotine style cutter slices smoothly through PE. All aluminum construction results in greater rigidity and lighter tool with 22%+ weight reduction versus prior HPC8 model. Hinged latch opens to fit around pipe in the ditch.  Greater pipe capacity, up to 9.06" O.D. (230 mm) fits true 8" DIPS and IPS for PE. Aluminum rails and crosshead have a hard anodized finish to reduce wear on sliding surfaces. Superior cuts with USA made blade.

    $0.01

  • Guillotine Pipe Cutter 125-350mm - HPC12 | RD04612

    Guillotine Pipe Cutter 125-350mm - HPC12 | RD04612

    Guillotine Pipe Cutters Robust Guillotine Pipe Cutters are designed to cut PE pipe thicker than SDR17 within 1/8" (3 mm) of square on medium and high-density pipe. HPC12 is designed for DIPS and IPS PE pipe from SDR17 to SDR9.3. Brass bushings in HPC12 crosshead feed assembly yield smooth feed and more consistent blade alignment. The accurate cuts from Reed Guillotine Cutters mean no facing is needed for electrofusion and only minimal facing for butt fusion joints. Durable, non-stick coated blade makes many square cuts with no chips to clog valves and small openings. Slight taper on blade allows an easy start to the cut, and holds form for a nice, straight cut. Blades are easy to sharpen or replace. NOTES: Reed strongly recommends use of the Grounding Accessory with Guillotine Cutters. Use a Grounding Accessory as a precaution against static build-up. Dissipate the charge and minimize the possibility of ignition. HPCs cut PE only and will not cut PVC or PP (polypropylene) pipe, such as Aquatherm. SPECIAL ORDER

    $0.01

  • Hex Wrench 67mm - R110HEX | RD02111

    Hex Wrench 67mm - R110HEX | RD02111

    The R110HEX hex wrench works for hex-shaped fittings on meters, drains, spuds, and chrome valves without damage from teeth

    $0.01

  • Hinged Cutter 1–2 1/2 inch for Stainless Steel | RD03110

    Hinged Cutter 1–2 1/2 inch for Stainless Steel | RD03110

    Hinged pipe cutter for stainless steel Hinged pipe cutter designed for stainless steel pipe. The hinged design allows the cutter to wrap around the pipe, making it suitable for use in confined spaces where full rotation is not possible. Lighter than most manual pipe cutters, these hinged cutters track better for square cuts and require less clearance, while providing improved torque so cuts are made faster and with less effort. The cutter applies even pressure around the pipe circumference to achieve a clean cut. The hinged construction allows quick installation onto the pipe and efficient operation in trench or in-place applications. Hinged cutters in this range:   Pipe Capacity Cast Iron /        Ductile Iron Copper Steel /              Stainless Steel Heavy Wall / Stainless Steel 1" – 2 1/2"              (32 – 76 mm) - - RD03110 - 2" – 4"                    (60 – 125 mm) RD03122 - RD03120 - 4" – 6"                    (114 – 182 mm) RD03132 RD03130 RD03130 - 6" – 8"                    (168 – 240 mm) RD03142 RD03140 RD03140 - 8" – 12"                  (219 – 356 mm) RD03152 - RD03150 RD03154  

    $0.01

  • Hinged Cutter 2–4 inch for Steel and Stainless Steel - H4S | RD03120

    Hinged Cutter 2–4 inch for Steel and Stainless Steel - H4S | RD03120

    Hinged pipe cutter for steel and stainless steel Hinged pipe cutter designed for steel and stainless steel pipe. The hinged design allows the cutter to wrap around the pipe, making it suitable for use in confined spaces where full rotation is not possible. Lighter than most manual pipe cutters, these hinged cutters track better for square cuts and require less clearance, while providing improved torque so cuts are made faster and with less effort. The cutter applies even pressure around the pipe circumference to achieve a clean cut. The hinged construction allows quick installation onto the pipe and efficient operation in trench or in-place applications.   Hinged cutters in this range:   Pipe Capacity Cast Iron /        Ductile Iron Copper Steel /              Stainless Steel Heavy Wall / Stainless Steel 1" – 2 1/2"              (32 – 76 mm) - - RD03110 - 2" – 4"                    (60 – 125 mm) RD03122 - RD03120 - 4" – 6"                    (114 – 182 mm) RD03132 RD03130 RD03130 - 6" – 8"                    (168 – 240 mm) RD03142 RD03140 RD03140 - 8" – 12"                  (219 – 356 mm) RD03152 - RD03150 RD03154

    $0.01

  • Hinged Cutter 4–6 inch for Steel and Stainless Steel - H6S | RD03130

    Hinged Cutter 4–6 inch for Steel and Stainless Steel - H6S | RD03130

    Hinged pipe cutter for steel and stainless steel Hinged pipe cutter designed for steel and stainless steel pipe. The hinged design allows the cutter to wrap around the pipe, making it suitable for use in confined spaces where full rotation is not possible. Lighter than most manual pipe cutters, these hinged cutters track better for square cuts and require less clearance, while providing improved torque so cuts are made faster and with less effort. The cutter applies even pressure around the pipe circumference to achieve a clean cut. The hinged construction allows quick installation onto the pipe and efficient operation in trench or in-place applications. Hinged cutters in this range:   Pipe Capacity Cast Iron /        Ductile Iron Copper Steel /              Stainless Steel Heavy Wall / Stainless Steel 1" – 2 1/2"              (32 – 76 mm) - - RD03110 - 2" – 4"                    (60 – 125 mm) RD03122 - RD03120 - 4" – 6"                    (114 – 182 mm) RD03132 RD03130 RD03130 - 6" – 8"                    (168 – 240 mm) RD03142 RD03140 RD03140 - 8" – 12"                  (219 – 356 mm) RD03152 - RD03150 RD03154

    $0.01

  • Hinged Cutter 6–8 inch for Steel and Stainless Steel - H8S | RD03140

    Hinged Cutter 6–8 inch for Steel and Stainless Steel - H8S | RD03140

    Hinged pipe cutter for steel and stainless steel Hinged pipe cutter designed for steel and stainless steel pipe. The hinged design allows the cutter to wrap around the pipe, making it suitable for use in confined spaces where full rotation is not possible. Lighter than most manual pipe cutters, these hinged cutters track better for square cuts and require less clearance, while providing improved torque so cuts are made faster and with less effort. The cutter applies even pressure around the pipe circumference to achieve a clean cut. The hinged construction allows quick installation onto the pipe and efficient operation in trench or in-place applications.   Hinged cutters in this range:   Pipe Capacity Cast Iron /        Ductile Iron Copper Steel /              Stainless Steel Heavy Wall / Stainless Steel 1" – 2 1/2"              (32 – 76 mm) - - RD03110 - 2" – 4"                    (60 – 125 mm) RD03122 - RD03120 - 4" – 6"                    (114 – 182 mm) RD03132 RD03130 RD03130 - 6" – 8"                    (168 – 240 mm) RD03142 RD03140 RD03140 - 8" – 12"                  (219 – 356 mm) RD03152 - RD03150 RD03154

    $0.01

  • Hinged Cutter 8–12 inch for Steel and Stainless Steel - H12S | RD03150

    Hinged Cutter 8–12 inch for Steel and Stainless Steel - H12S | RD03150

    Hinged pipe cutter for steel and stainless steel Hinged pipe cutter designed for steel and stainless steel pipe. The hinged design allows the cutter to wrap around the pipe, making it suitable for use in confined spaces where full rotation is not possible. Lighter than most manual pipe cutters, these hinged cutters track better for square cuts and require less clearance, while providing improved torque so cuts are made faster and with less effort. The cutter applies even pressure around the pipe circumference to achieve a clean cut. The hinged construction allows quick installation onto the pipe and efficient operation in trench or in-place applications.   Hinged cutters in this range:   Pipe Capacity Cast Iron /        Ductile Iron Copper Steel /              Stainless Steel Heavy Wall / Stainless Steel 1" – 2 1/2"              (32 – 76 mm) - - RD03110 - 2" – 4"                    (60 – 125 mm) RD03122 - RD03120 - 4" – 6"                    (114 – 182 mm) RD03132 RD03130 RD03130 - 6" – 8"                    (168 – 240 mm) RD03142 RD03140 RD03140 - 8" – 12"                  (219 – 356 mm) RD03152 - RD03150 RD03154

    $0.01

  • HSS Cutter Wheel - Powered Pipe Threaders | RX135077

    HSS Cutter Wheel - Powered Pipe Threaders | RX135077

    Code No. Description Use RX135076 Cutter wheel for Steel pipe (suit P50A, R50A, NP50A, S80A, NP80, N100A) Steel pipe RX135077 Cutter wheel for Stainless Steel pipe (suit P50A, R50A, NP50A, S80A, NP80, N100A) Stainless Steel pipe

    $0.01

  • Hydraulic Pipe Cutter 2-15 inch Wheeler-Rex | WR-299015

    Hydraulic Pipe Cutter 2-15 inch Wheeler-Rex | WR-299015

    Plumboss 2990-15 Hydraulic Chain Pipe Cutter Designed for fast, clean cutting of cast iron, tile and concrete pipe. The chain wraps around the pipe and uses a hydraulic “squeeze and pop” action, so the cutter does not need to rotate around the pipe. Ideal for trenches, confined spaces and loose pipe, requiring only 50–75mm clearance to position the chain. The remote hydraulic pump provides controlled cutting power while keeping the operator clear of the cutting area. Features: Fast hydraulic cutting action Ideal for cast iron, tile and concrete pipe No rotation around the pipe required Only 50–75mm clearance needed Supplied with pump, hose and carry case Not suitable for ductile iron or steel pipe The 2990-15 has an overall cutting capacity of 2" to 15", depending on the pipe material, and requires only 2"–3" clearance. Supplied complete with hydraulic pump, hose and carry case. Cutting Capacity Pipe Type Capacity Service Weight Soil Pipe 2"–10" No-Hub Soil Pipe 2"–8" XH Cast Iron Soil Pipe 2"–8" Tile 2"–15" Concrete 4"–8" Cast Iron Water Main – ASA Class 22 2"–6" Cast Iron Water Main – ASA Class 25 2"–4" Cast Iron Water Main – ASA Class 26 2"–4" AC Pipe 2"–8" Not suitable for ductile iron or steel pipe.  

    $0.01

  • Hydraulic Pipe Cutter 4 -18 inch Wheeler-Rex | WR-389018

    Hydraulic Pipe Cutter 4 -18 inch Wheeler-Rex | WR-389018

    Hydraulic Pipe Cutter 4"-18" Wheeler-Rex Snap Type Cutter (Hydraulic) Hydraulic Cutters are the solution to cutting larger diameter Cast Iron, Tile and Concrete Pipe. Like the hand operated "snap" cutters, hydraulic cutters are not rotated around pipe. Their remotely operated hydraulic pumps provide the required power. A 2in -3in minimum clearance is all that is needed to wrap cutter chain around pipe. They come complete with pump, hose and case. Snap Type Cutters Employ the "Squeeze and Pop"cutting principle Absolutely the best for work in the trench Great for cutting Cast Iron, Tile and A/C Remote Hydraulic Pump for ease and safety Only requires clearance of 2" to 3" Materials are cut with same wheels Cutter does NOT rotate around the pipe, chain squeezes and pops the pipe Cutters work well in trench or on loose pipe

    $0.01

  • Hydraulic Pipe Cutter 6 -24 inch Wheeler-Rex | WR-559024

    Hydraulic Pipe Cutter 6 -24 inch Wheeler-Rex | WR-559024

    Hydraulic Pipe Cutter 6"- 24" Wheeler-Rex Snap Type Cutter (Hydraulic) Hydraulic Cutters are the solution to cutting larger diameter Cast Iron, Tile and Concrete Pipe. Like the hand operated "snap" cutters, hydraulic cutters are not rotated around pipe. Their remotely operated hydraulic pumps provide the required power. A 2in -3in minimum clearance is all that is needed to wrap cutter chain around pipe. They come complete with pump, hose and case. Snap Type Cutters Employ the "Squeeze and Pop"cutting principle Absolutely the best for work in the trench Great for cutting Cast Iron, Tile and A/C Remote Hydraulic Pump for ease and safety Only requires clearance of 2" to 3" Materials are cut with same wheels Cutter does NOT rotate around the pipe, chain squeezes and pops the pipe Cutters work well in trench or on loose pipe SPECIAL ORDER

    $0.01

  • Hydraulic Pipe Cutter 6 -36 inch Wheeler-Rex | WR-559036

    Hydraulic Pipe Cutter 6 -36 inch Wheeler-Rex | WR-559036

    Hydraulic Pipe Cutter 6"-36" Wheeler-Rex Snap Type Cutter (Hydraulic) Hydraulic Cutters are the solution to cutting larger diameter Cast Iron, Tile and Concrete Pipe. Like the hand operated "snap" cutters, hydraulic cutters are not rotated around pipe. Their remotely operated hydraulic pumps provide the required power. A 2in -3in minimum clearance is all that is needed to wrap cutter chain around pipe. They come complete with pump, hose and case. Snap Type Cutters Employ the "Squeeze and Pop"cutting principle Absolutely the best for work in the trench Great for cutting Cast Iron, Tile and A/C Remote Hydraulic Pump for ease and safety Only requires clearance of 2" to 3" Materials are cut with same wheels Cutter does NOT rotate around the pipe, chain squeezes and pops the pipe Cutters work well in trench or on loose pipe SPECIAL ORDER

    $0.01

  • IC1 Saw Tooth Blade | IC1RS

    IC1 Saw Tooth Blade | IC1RS

    IC1 Saw Tooth Blade Fast cutting replacement blade for internal pipe cutters The Plumboss IC1 Saw Tooth Blade is a replacement blade designed for use with internal pipe cutters, delivering fast and aggressive cutting performance on plastic pipe. Engineered from heat-treated steel, the saw tooth profile allows efficient cutting of materials such as PVC, ABS and similar plastics, ensuring clean results when cutting from the inside of the pipe. Designed to suit IC1 series internal pipe cutters, this blade restores cutting performance and extends tool life. It is ideal for plumbing and maintenance applications where pipes need to be trimmed below floor level or in confined spaces where external access is limited. Code Description IC1A Internal Pipe Cutter 1 1/2" Minimum I.D Abrasive - 10cm Long IC1S Internal Pipe Cutter 1 1/4" Minimum I.D Saw - 10cm Long IC1SL Internal Pipe Cutter 1 1/4" Minimum I.D Saw - 18cm Long IC1RA Replacement Abrasive Blade IC1RD Replacement Diamond Blade IC1RS Replacement Saw Blade

    $0.01

  • Internal Pipe Cutter 1 1/4 In Min - 10cm long | IC1S

    Internal Pipe Cutter 1 1/4 In Min - 10cm long | IC1S

    Internal Pipe Cutter 1 1/4 In Min Compact internal cutting for tight access work The Plumboss Internal Pipe Cutter IC1S is designed for cutting pipe from the inside, making it ideal for tight access applications such as below floor level, inside walls, or within confined spaces. Its compact 10cm shaft allows precise cutting where traditional external cutters cannot reach. Fitted with a heat-treated saw tooth blade, the cutter delivers fast, aggressive cutting performance on plastic pipe, including PVC and ABS, as well as timber for applications such as sink lugs. Designed to be used with a standard drill, it provides a simple and efficient solution for plumbing and maintenance work. Code Description IC1A Internal Pipe Cutter 1 1/2" Minimum I.D Abrasive - 10cm Long IC1S Internal Pipe Cutter 1 1/4" Minimum I.D Saw - 10cm Long IC1SL Internal Pipe Cutter 1 1/4" Minimum I.D Saw - 18cm Long IC1RA Replacement Abrasive Blade IC1RD Replacement Diamond Blade IC1RS Replacement Saw Blade

    $0.01


You have seen 168 out of 764 products

© 2026 Plumboss, Powered by Shopify

    Login

    Forgot your password?

    Don't have an account yet?
    Create account