Pipe Working Tools

59 products

  • CST2 - Pipe Freezing Kit Cold Shot | GS-118020

    CST2 - Pipe Freezing Kit Cold Shot | GS-118020

    No need to drain water lines, sprinkler systems, or hot water systems before cutting pipe or tubing. The Cold-Shot keeps pressurized systems operating while you make repairs.It freezes all type of liquids in steel, copper, cast iron, aluminum, and plastic pipes ranging from 1/8" to 2" (10 mm - 60 mm) using carbon dioxide (CO2). Dip-tube type cylinders are available at all welding supply houses. The Cold-Shot is faster and less expensive than "refrigerator-type" units faster and uses less CO2 than "bag-type" units. In five minutes you are ready to go to work on copper tubing, just three minutes for cast iron pipe. The Cold-Shot is easy to use. Just place the freeze head around the pipe, attach the hose, and open the cylinder valve. Liquid carbon dioxide will flow into the freeze head and form dry ice with a temperature of minus 110F (-79C). That's cold enough to form an ice pack that can withstand 7,000 psi, yet won't damage pipes. Kit includes 10 sets of freeze heads for 1/8" to 2" lines (10mm to 60mm), two high pressure spiral hoses with injectors, T-distributor, locking nut, hex head screwdriver, rubber gloves, goggles and carrying case

    $0.01

  • Plumboss Blade to suit Drillchamf Tool | DRILLCHAMF-B

    $0.01

  • Plumboss Drill Chamfering Tool 110-160mm | DRILLCHAMF160

    Plumboss Drill Chamfering Tool 110-160mm | DRILLCHAMF160

    EASY SET UP - the diameter of the Spider Burr automatically and quickly adjusts to the required outer circumference of the pipe. Works on different plastic pipes and tubes such as UPVC, PVC, PP, PE, CPVC, ABS etc. Working range: 110 - 160 mm (4"- 6"). Works best with standard electric/cordless drills - 14V and up. For best performance run the drill at a low RPM. Use the drill position setting. Same blade is used for both models and is replaceable. Note: This tool is not recommended for blue brute pipe.

    $0.01

  • Plumboss Drill Chamfering Tool 72-110mm | DRILLCHAMF

    Plumboss Drill Chamfering Tool 72-110mm | DRILLCHAMF

    Automatically adjusts to the outside diameter of the pipe with centripetal force. Works on different plastic pipes and tubes such as UPVC, PVC, PP, PE, CPVC,ABS etc. Working range: 75 - 110 mm (3”- 4”). Works best with standard electric/cordless drills - 14V and up. For best performance run the drill at a low RPM. Note: This tool is not recommended for blue brute pipe.

    $0.01

  • Plumboss Sluice Valve Key 1 1-4 inch square 900mm | SVK02

    Plumboss Sluice Valve Key 1 1-4 inch square 900mm | SVK02

    For activating a range of sluice and ball valves Head:1 ¼‚¬ (32mm) tapered square head Length: 900mm Solid steel construction

    $0.01

  • Plumboss Stainless Poly Squeeze-off Tool | PESS01

    Plumboss Stainless Poly Squeeze-off Tool | PESS01

    Made in Australia from precision machined stainless steel and brass for smooth action & durability. Ideal for squeezing off poly gas & water lines. 0-32 mm capacity. Secured bottom bar. A must have tool for repair and emergency work.

    $0.01

  • Plumboss Fibreglass Soil Probe Rod 4ft | INSULPROBE

    Plumboss Fibreglass Soil Probe Rod 4ft | INSULPROBE

    Used to locate underground utility lines, Reed Fiberglass Probe Rods are certified non-conductive. The four foot soil probe has a metal tip and offers comparable strength and durability to other fiberglass probe rods in the industry.

    $0.01

  • Plumboss Gatic Lid Lifter Kit (w/out 2 x GLSD1) | GLKIT-B

    Plumboss Gatic Lid Lifter Kit (w/out 2 x GLSD1) | GLKIT-B

    Manhole Lid lifter kit - B kit includes 2X Long Handle Lid Lifters 2X Roller Pipes 1X Scraper Knife 1X Carry Bag Note: Manhole Lifters are fabricated not Cast.. Eliminating the weakness created by welding dissimilar metals.

    $0.01

  • Plumboss Gatic Lid Lifter Kit | GLKIT

    Plumboss Gatic Lid Lifter Kit | GLKIT

    Manhole Lid lifter kit kit includes 2X D Handle Lifters 2X Long Handle Lid Lifters 2X Roller Pipes 1X Scraper Knife 1X Carry Bag Note: Manhole Lifters are fabricated not Cast.. Eliminating the weakness created by welding dissimilar metals.

    $0.01

  • Plumboss Fire Hydrant Stopper - Square Head | FHSSQ

    Plumboss Fire Hydrant Stopper - Square Head | FHSSQ

    This unit is designed to provide temporary sealing of faulty fire hydrants until traffic conditions or work load permit repair work to be done Available in 2 head styles: Bolt Head, Square Head

    $0.01

  • Plumboss Fire Hydrant Stopper - Bolt Head | FHSBH

    Plumboss Fire Hydrant Stopper - Bolt Head | FHSBH

    This unit is designed to provide temporary sealing of faulty fire hydrants until traffic conditions or work load permit repair work to be done Available in 2 head styles: Bolt Head, Square Head

    $0.01

You have seen 59 out of 59 products

© 2025 Plumboss, Powered by Shopify

    Login

    Forgot your password?

    Don't have an account yet?
    Create account