Plumboss
-
Plumboss DRAIN SURGEON 5/8inch x 100ft cable | DS-100-5-8
The drainSURGEON'S field tested design offers easy handling. One person can easily load it into many vehicles as the machine slides smoothly from the loading wheel on the handle. The inbuilt stair climbers also assists with tricky site access and finally, the semi pneumatic 250mm wheels are great for moving the machine from point to point. The adjustable height handle can be reset to be up to 75mm longer, or more compact, depending upon your preference. With the driving and pulling power for long, tough jobs, drainSURGEON'S Power Cable Feed easily handles 17mm and 19mm cables. To adjust to different cable sizes, simply turn the knob on top of the feed. A large drum holds 30 metres of 17mm or 19mm Flexicore® cable. The drum has a see-through inner cage, so you can quickly see how much cable is left in the drum. Weight: 52 kg without cable Dimensions: 66 cm deep; 56 cm wide; 104 cm high Large Drum: Equipped with an inner drum cage; holds 30 metres of 17mm cable Drum Removal: Loosen two knobs, remove ringbolt and lift off Motor: 1/2 horse power with capacitor start; overload protection; forward , off, reverse switch; 6.1 metres of power cord Load Speed: 170 rpm (revolutions per minute) Wheels: 250mm semi-pneumatic heavy-duty wheels with ball bearings; brake locks - you can lock wheels during operation Foot Switch: Pneumatic, no electrical contact between pedal and motor Leather Gloves: With double-reinforced palms for hand protection when guiding the cable Cable: 30 metres x 17mm for 76mm to 152mm lines; heavy gauge wire coiled tightly around 49-strand aircraft-type wire rope and heat treated Vehicle Loading Wheel: Assists with loading onto and out of many vehicles Power Cable Feed: Drives or retracts cable with variable speed at up to 6.1 metres per minute without having to reverse the motor rotation Tool Box: Attached to rear of machine Stair Climbers: V-belts running on nylon rollers
$0.01
-
Plumboss Blade to suit Drillchamf Tool | DRILLCHAMF-B
Blade to suit DRILLCHAMF
$0.01
-
Plumboss Drill Chamfering Tool 72-110mm | DRILLCHAMF
Automatically adjusts to the outside diameter of the pipe with centripetal force. Works on different plastic pipes and tubes such as UPVC, PVC, PP, PE, CPVC,ABS etc. Working range: 75 - 110 mm (3”- 4”). Works best with standard electric/cordless drills - 14V and up. For best performance run the drill at a low RPM. Note: This tool is not recommended for blue brute pipe.
$0.01
-
Plumboss Lumber Crayon - Yellow (Minimum Buy 12) | CR02Y
Industry preferred brand Used predominantly to mark timber, also useful in government, engineering and construction industries for marking bitumen and concrete Economical, easy to carry and won't leak, spill, smudge or fray 12 crayons per pack Colours available in: Blue, Black, Red, White, Yellow
$0.01
-
Plumboss Lumber Crayon - White (Minimum Buy 12) | CR02W
Industry preferred brand Used predominantly to mark timber, also useful in government, engineering and construction industries for marking bitumen and concrete Economical, easy to carry and won't leak, spill, smudge or fray 12 crayons per pack Colours available in: Blue, Black, Red, White, Yellow
$0.01
-
Plumboss Lumber Crayon - Red (Minimum Buy 12) | CR02R
Industry preferred brand Used predominantly to mark timber, also useful in government, engineering and construction industries for marking bitumen and concrete Economical, easy to carry and won't leak, spill, smudge or fray 12 crayons per pack Colours available in: Blue, Black, Red, White, Yellow
$0.01
-
Plumboss Lumber Crayon - Black (Minimum Buy Box 12) | CR02BL
Industry preferred brand Used predominantly to mark timber, also useful in government, engineering and construction industries for marking bitumen and concrete Economical, easy to carry and won't leak, spill, smudge or fray 12 crayons per pack Colours available in: Blue, Black, Red, White, Yellow
$0.01
-
Plumboss Lumber Crayon - Blue (Minimum Buy 12) | CR02B
Industry preferred brand Used predominantly to mark timber, also useful in government, engineering and construction industries for marking bitumen and concrete Economical, easy to carry and won't leak, spill, smudge or fray 12 crayons per pack Colours available in: Blue, Black, Red, White, Yellow
$0.01
-
Plumboss Dripless Caulking Gun | CGP1
PRO-GUN Best Quality Available Hooked handle for hanging on ladder rung or gutter
$0.01
-
Plumboss Skeleton/Caulking Gun | CG1
Hooked handle for hanging on ladder rung or gutter Solid, reliable, economical Hi-Vis
$0.01
-
Plumboss Cold Chisel 250 x 25mm | CC250-25
Used for general cutting including mild steel, bolts and concrete Forged from tough carbon manganese steel Correctly hardened and tempered blade Softer head is designed to mushroom reducing the likelihood of high velocity chips Accurately ground to the optimum angle for cutting
$0.01
-
Plumboss Cold Chisel 150 x 12.5mm | CC150-12
Used for general cutting including mild steel, bolts and concrete Forged from tough carbon manganese steel Correctly hardened and tempered blade Softer head is designed to mushroom reducing the likelihood of high velocity chips Accurately ground to the optimum angle for cutting
$0.01
-
Plumboss Poly Lockfast Rotating Handle | BPRTH
For use with rod lengths to allow easier rotation of rods
$0.01
-
Plumboss Plunger Rubber Only 6 inch (150mm) | BPPL6RO
Plunger Rubber only to suit BPPL6.
$0.01
-
Plumboss Plunger Rubber Only 4 inch (100mm) | BPPL4RO
Plunger Rubber only to suit BPPL4.
$0.01
-
Plumboss Poly Double Worm Screw 4 inch (6 inch pipe) | BPDWS4
Pierces blockages such as paper or rags and the obstruction is drawn back to clear the pipe.
$0.01
-
Plumboss Poly Lockfast Double Worm Screw 2 inch | BPDWS2
Pierces blockages such as paper or rags and the obstruction is drawn back to clear the pipe.
$0.01
-
Plumboss Poly Lockfast Drop Scraper | BPDS
Glides over small obstructions and drops into vertical scraping position to allow offending material to be dragged back towards the operator Scraper to suit 4" pipes
$0.01
-
Plumboss Poly Lockfast Clearing Wheel | BPCW
Guides rods around difficult bends and removes minor blockages by pushing material clear
$0.01
-
Plumboss Poly Lockfast Drain Rod 3ft x 3/4 inch | BP343
Unique Brass Locking nuts ensure rods stay joined whilst working rods into drain blockages
$0.01
-
Plumboss Sliding Bevel | BEVSL
Features and Benefits Premium All Metal Construction Unique Locking Mechanism Stainless Steel Blade Made in Japan
$0.01
-
Plumboss Hole Saw Extension Arbor 300mm (12") | BAE300
The perfect addition to your plumBOSS Built-In Arbor Hole Saw collection. This Extension Arbor fits all our Hole Saws, extending their reach and helping you drill holes in hard-to-reach places. These Extensions can be stacked, so you can multiply your reach as far as you need. At 300mm in length, it is a manageable, yet useful size. Built to the same quality standard as our ultra-durable Hole Saws.
$0.01
-
Plumboss Built-In Arbor Hole Saw 152mm (6") | BA96
The plumBOSS Built-In Arbor Hole Saw is the Ultimate Plumber's Hole Saw. It's extra-thick 5.5mm Back plate and welded-in arbor make it the most durable hole saw when drilling into pipes or on angles. Changing sizes is a breeze, with no need to worry about arbors and pilot drills. Ultimate Convenience, Ultimate Durability, Ultimate Quality. - Comprehensive size range - 16mm to 152mm- Hole saw kits available - see codes BA4KIT & BA9KIT The plumBOSS difference: Unique, Built-In Arbor - maximum durability and convenience Ideal for drilling on angles and into pipes - unlike traditional hole saws Free pilot drill fitted - ready to use straight from the box Ultra-thick 5.5mm back plate - eliminates warping, super smooth action. Angled side slots and back plate holes - easy plug removal, efficient cooling Irregular tooth pattern - efficient swarf ejection, fast, smooth cut Suitable for Wood, Plastic, Steel, Galvanised Steel, Aluminium, Stainless Steel, Copper, Brass, and more.
$0.01
-
Plumboss Built-In Arbor Hole Saw 127mm (5") | BA80
The plumBOSS Built-In Arbor Hole Saw is the Ultimate Plumber's Hole Saw. It's extra-thick 5.5mm Back plate and welded-in arbor make it the most durable hole saw when drilling into pipes or on angles. Changing sizes is a breeze, with no need to worry about arbors and pilot drills. Ultimate Convenience, Ultimate Durability, Ultimate Quality. - Comprehensive size range - 16mm to 152mm- Hole saw kits available - see codes BA4KIT & BA9KIT The plumBOSS difference: Unique, Built-In Arbor - maximum durability and convenience Ideal for drilling on angles and into pipes - unlike traditional hole saws Free pilot drill fitted - ready to use straight from the box Ultra-thick 5.5mm back plate - eliminates warping, super smooth action. Angled side slots and back plate holes - easy plug removal, efficient cooling Irregular tooth pattern - efficient swarf ejection, fast, smooth cut Suitable for Wood, Plastic, Steel, Galvanised Steel, Aluminium, Stainless Steel, Copper, Brass, and more.
$0.01
You have seen 312 out of 716 products