Plumboss

Plumboss Sluice Valve Key 1 1-4 inch square 900mm | SVK02

For activating a range of sluice and ball valves Head:1 ¼‚¬ (32mm) tapered square head Length: 900mm Solid steel construction

Read more less

$0.01

Plumboss Grommets 34mm to suit EB-SP2234 (100/pkt) | STP710GM

Product Features Australian made plastic grommets 34mm fit perfectly with plumBOSS Stud Punch EB-SP2234 Self-centring tabs protect and secure tube

Read more less

$0.01

Plumboss Stainless Steel Test Bucket with 4 x RTK02 | SSTP50

STAINLESS STEEL HAND TEST PUMP Stainless Test Buckets The SSTP50 Test Pump features a 50bar (726psi) pressure gauge. The 12L water bucket is made of stainless steel and has a 1.5m hose attached. This unit has a maximum pressure of 5000kpa

Read more less

$0.01

Plumboss Red Acid Gloves 45cm Pair | REDAG45

Features & Benefits 45cm single dipped PVC construction Cotton interlock liner for easy donning Resistant to oil, grease and chemicals Recommended Uses Refining & Petrochemical industries Fishing, Mining & Construction Environments Refuse & Waste Management

Read more less

$0.01

Cone Reamer Inner / Outer 3/16" – 1 1/2" | RECCR

Cone Reamer Inner / Outer 3/16" – 1 1/2" Quick, clean deburring for tube preparation The Plumboss Cone Reamer is a compact, hand-held deburring tool designed to remove burrs from both the inside and outside of tubing. Ideal for pipe preparation prior to joining, it ensures smooth, clean edges for improved fit-up and reliable connections. Fitted with three hollow ground tool steel cutters, the reamer delivers fast and consistent deburring performance across copper, aluminium and brass tubing. The ergonomic design fits comfortably in the hand, making it easy to use on-site for quick touch-ups and repetitive work.

Read more less

$0.01

Electric Hydrostatic Test Pump 220V - EHTP500E | RD08171

Smooth running, quiet 3/4 hp motor. Electric pump includes a 15' (46m) high pressure hose for filling the system. Pumps are self-priming and work with pressurized or non-pressurized water supply. Test water meters, plumbing lines, pressure vessels, solar systems and sprinkler systems. Output pressure adjusts easily.

Read more less

$0.01

Plumboss Short Folding Leg Pipe Stand - V Head | PS-SFLD-V

Plumboss Short Folding Leg Pipe Stand – V Head Compact Folding Stand for Lower Working Heights The Plumboss Short Folding Leg Pipe Stand with V Head is designed for professional trade use where a compact stand and reduced working height are required. The short folding leg design provides stable support while allowing the stand to fold down for easy transport and storage. A convenient adjusting screw allows accurate height adjustment to achieve the correct working position. Once set, a hardened steel locking ring secures the height under load, helping ensure consistent performance and long service life. The V head provides secure pipe positioning for fabrication, welding, and general pipe handling tasks. All external surfaces are powder-coated and zinc phosphate-plated to resist corrosion in demanding work environments. Built for durability and portability, this pipe stand is well suited to site and workshop applications where space and mobility are important. Pipe Stand Comparison Table Fixed Leg Folding Leg Short Folding Leg Attachments V Head PS-FXD-V PS-FLD-V PS-SFLD-V PS-VH Large V Head PS-FXD-LVH PS-FLD-LVH PS-SFLD-LVH PS-LVH SS V Head PS-FXD-VSS PS-FLD-VSS PS-SFLD-VSS - Roller Head PS-FXD-R PS-FLD-R PS-SFLD-R PS-RA, PS-RH Ball Transfer - - - PS-BTH Stand Only - - PS-SFLD -

Read more less

$0.01

Plumboss Short Folding Leg Pipe Stand - Roller Head | PS-SFLD-R

Plumboss Short Folding Leg Pipe Stand – Roller Head Compact Folding Stand with Roller Head Rotation The Plumboss Short Folding Leg Pipe Stand with Roller Head is designed for professional trade use where a compact, portable stand and smooth pipe rotation are required. The short folding leg design makes this stand easy to transport and store, while providing stable support at lower working heights. The adjustable roller head allows pipe to rotate smoothly on the stand, making positioning and handling easier when working with various pipe sizes. A convenient adjusting screw provides accurate height adjustment, while a hardened steel locking ring secures the height under load to ensure long-term reliability in demanding work environments. All external surfaces are powder-coated and zinc phosphate-plated to resist corrosion. Built for durability and ease of use, this compact pipe stand is well-suited to fabrication, welding, and general pipe handling tasks where space and portability are important. Pipe Stand Comparison Table Fixed Leg Folding Leg Short Folding Leg Attachments V Head PS-FXD-V PS-FLD-V PS-SFLD-V PS-VH Large V Head PS-FXD-LVH PS-FLD-LVH PS-SFLD-LVH PS-LVH SS V Head PS-FXD-VSS PS-FLD-VSS PS-SFLD-VSS - Roller Head PS-FXD-R PS-FLD-R PS-SFLD-R PS-RA, PS-RH Ball Transfer - - - PS-BTH Stand Only - - PS-SFLD -

Read more less

$0.01

Plumboss Fixed Leg Pipe Stand V Head Stainless Steel | PS-FXD-VSS

Fixed Leg Pipe Stand with Stainless Steel V Head Stainless Steel V Head for Added Durability The Fixed Leg Pipe Stand with Stainless Steel V Head is built for professional trade use where strength, reliability, and long service life are essential. Featuring a fixed leg design for stability, this stand is ideal for pipe fabrication, welding, and general support applications. A convenient adjusting screw allows fast and accurate height adjustment to achieve the correct working position. Once set, a hardened steel locking ring secures the height, helping prevent movement under load and reducing long-term wear. This proven combination ensures consistent performance over years of daily use. The stainless steel V head provides increased durability and resistance to wear in demanding workshop and site environments. All external surfaces are powder-painted and zinc phosphate-plated to resist corrosion. With a working load capacity of 1100 kg (2500 lbs.) and a wide height adjustment range, this pipe stand delivers dependable performance for professional pipe handling. Pipe Stand Comparison Table Fixed Leg Folding Leg Short Folding Leg Attachments V Head PS-FXD-V PS-FLD-V PS-SFLD-V PS-VH Large V Head PS-FXD-LVH PS-FLD-LVH PS-SFLD-LVH PS-LVH SS V Head PS-FXD-VSS PS-FLD-VSS PS-SFLD-VSS - Roller Head PS-FXD-R PS-FLD-R PS-SFLD-R PS-RA, PS-RH Ball Transfer - - - PS-BTH Stand Only - - PS-SFLD -

Read more less

$0.01

Plumboss Fixed Leg Pipe Stand V Head | PS-FXD-V

Fixed Leg Pipe Stand - V Head Built For The Trade The Fixed Leg Pipe Stand with V Head is designed for reliable, everyday use on site or in the workshop. Strong, stable, and easy to adjust, it provides dependable support for pipe fabrication, welding, and fitting tasks. A precision-adjusting screw allows quick and accurate height adjustment to suit the job at hand. Once set, a hardened steel locking ring holds the stand securely in position, reducing wear and helping maintain performance over years of use. This simple, proven design makes these pipe jacks a long-lasting choice for professional trades. All external surfaces are powder-coated and zinc phosphate-plated to help resist corrosion in tough working environments. With a wide working height range and verified load testing, this pipe stand delivers the strength and reliability plumbers and fabricators expect. Pipe Stand Comparison Table Fixed Leg Folding Leg Short Folding Leg Attachments V Head PS-FXD-V PS-FLD-V PS-SFLD-V PS-VH Large V Head PS-FXD-LVH PS-FLD-LVH PS-SFLD-LVH PS-LVH SS V Head PS-FXD-VSS PS-FLD-VSS PS-SFLD-VSS - Roller Head PS-FXD-R PS-FLD-R PS-SFLD-R PS-RA, PS-RH Ball Transfer - - - PS-BTH Stand Only - - PS-SFLD -

Read more less

$0.01

Plumboss Fixed Leg Pipe Stand Roller Head | PS-FXD-R

Plumboss Fixed Leg Pipe Stand - Roller Head Fixed Leg Stability with Roller Head Rotation The Plumboss Fixed Leg Pipe Stand with Roller Head is designed for professional trade use where maximum stability and controlled pipe rotation are required. The fixed leg design provides a solid base, while the adjustable roller head allows pipe to rotate smoothly, making positioning and handling easier during fabrication and welding. A convenient adjusting screw allows fast and accurate height adjustment to achieve the correct working position. Once set, a hardened steel locking ring secures the height, helping reduce movement under load and extending the service life of the stand. This proven mechanism delivers reliable performance in demanding work environments. All external surfaces are powder-coated and zinc phosphate-plated to resist corrosion. With a wide working height range and heavy-duty load capacity, this pipe stand provides dependable support for rotating, welding, and general pipe handling tasks. Pipe Stand Comparison Table Fixed Leg Folding Leg Short Folding Leg Attachments V Head PS-FXD-V PS-FLD-V PS-SFLD-V PS-VH Large V Head PS-FXD-LVH PS-FLD-LVH PS-SFLD-LVH PS-LVH SS V Head PS-FXD-VSS PS-FLD-VSS PS-SFLD-VSS - Roller Head PS-FXD-R PS-FLD-R PS-SFLD-R PS-RA, PS-RH Ball Transfer - - - PS-BTH Stand Only - - PS-SFLD -

Read more less

$0.01

Plumboss Folding Leg Pipe Stand V Head Stainless Steel | PS-FLD-VSS

Plumboss Folding Leg Pipe Stand – V Head Stainless Steel Stainless Steel V Head with Increased Rigidity and Control The Plumboss Folding Leg Pipe Stand with Stainless Steel V Head is a deluxe version designed for professional applications where increased rigidity, material protection, and control are required. The folding leg design allows for easy transport and compact storage while maintaining strong on-site stability. An epoxy-coated stainless steel V head reduces scratching on pipe surfaces and eliminates arcing, making this stand well-suited to fabrication and welding environments. Height adjustment is controlled via a convenient adjusting screw, with a locking pin on the height-adjusting slide tube providing added security under load. Additional rigidity is achieved through a tightening handle on the leg brace sliding ring, allowing the legs to be locked securely in any position. These enhancements improve overall stability and weight handling compared to the standard model. All external surfaces are powder-coated and zinc phosphate-plated to resist corrosion in demanding work conditions. Pipe Stand Comparison Table Fixed Leg Folding Leg Short Folding Leg Attachments V Head PS-FXD-V PS-FLD-V PS-SFLD-V PS-VH Large V Head PS-FXD-LVH PS-FLD-LVH PS-SFLD-LVH PS-LVH SS V Head PS-FXD-VSS PS-FLD-VSS PS-SFLD-VSS - Roller Head PS-FXD-R PS-FLD-R PS-SFLD-R PS-RA, PS-RH Ball Transfer - - - PS-BTH Stand Only - - PS-SFLD -

Read more less

$0.01

Plumboss Folding Leg Pipe Stand V Head | PS-FLD-V

Folding Leg Pipe Stand - V Head Folding Leg Design for Easy Transport and Storage The Plumboss Folding Leg Pipe Stand with V Head is designed for professional trade use where portability and stability are equally important. The folding leg design allows the stand to be quickly collapsed for transport and storage, making it ideal for site work and mobile applications. A convenient adjusting screw provides fast and accurate height adjustment to achieve the correct working position. Once set, a hardened steel locking ring secures the height in place, helping reduce movement under load and extending the working life of the stand. This proven mechanism delivers reliable performance over years of use. All external surfaces are powder-coated and zinc phosphate-plated to resist corrosion in tough working environments. With a wide working height range and verified load testing, this pipe stand offers dependable support for fabrication, welding, and general pipe handling tasks. Pipe Stand Comparison Table Fixed Leg Folding Leg Short Folding Leg Attachments V Head PS-FXD-V PS-FLD-V PS-SFLD-V PS-VH Large V Head PS-FXD-LVH PS-FLD-LVH PS-SFLD-LVH PS-LVH SS V Head PS-FXD-VSS PS-FLD-VSS PS-SFLD-VSS - Roller Head PS-FXD-R PS-FLD-R PS-SFLD-R PS-RA, PS-RH Ball Transfer - - - PS-BTH Stand Only - - PS-SFLD -

Read more less

$0.01

Plumboss Folding Leg Pipe Stand Roller Head | PS-FLD-R

Plumboss Folding Leg Pipe Stand – Roller Head Roller Head for Easy Pipe Rotation The Plumboss Folding Leg Pipe Stand with Roller Head is designed for professional trade use where controlled pipe rotation is required. The adjustable roller head allows pipe to turn smoothly on the stand, making it easier to position and work on various pipe sizes during fabrication and fitting. A convenient adjusting screw provides fast and accurate height adjustment to achieve the correct working position. Once set, a hardened steel locking ring secures the height, helping reduce movement under load and extending the service life of the stand. The folding leg design allows the stand to collapse for easy transport and compact storage, making it ideal for site work. All external surfaces are powder-coated and zinc phosphate-plated to resist corrosion in tough working environments. With a wide working height range and a heavy-duty load capacity, this pipe stand delivers reliable support for rotating, welding, and handling pipe. Pipe Stand Comparison Table Fixed Leg Folding Leg Short Folding Leg Attachments V Head PS-FXD-V PS-FLD-V PS-SFLD-V PS-VH Large V Head PS-FXD-LVH PS-FLD-LVH PS-SFLD-LVH PS-LVH SS V Head PS-FXD-VSS PS-FLD-VSS PS-SFLD-VSS - Roller Head PS-FXD-R PS-FLD-R PS-SFLD-R PS-RA, PS-RH Ball Transfer - - - PS-BTH Stand Only - - PS-SFLD -

Read more less

$0.01

Plumboss Plug Safe - Right Angle Adaptor with 6in Test Plug | PSBW-6PS

Plumboss Plug Safe - Right Angle Adaptor with 6in Test Plug External tightening test plug system The Plumboss Plug Safe system is an Australian-made solution designed to prevent losing test plugs down inspection openings while allowing tightening from outside the pipe. The zinc‑plated steel adaptor features a 200mm handle so the plug can be installed and tightened externally, keeping hands clear of the pipe and reducing the risk of cuts, abrasions and lost plugs. Using a screw and wedge mechanism, the Plug Safe system grips significantly tighter than standard hand tightening. Ideal for pipe stopping, pressure testing and maintenance work where inspection openings limit access inside the pipe. Operating Pressure Sizes This is a guide to the maximum back pressure for different types and sizes of test plugs. These pressures will vary depending on the cleanliness and condition of the pipe bore and the ambient temperature. ½” (12.5mm) to (30mm) 30 psi 1½” (40mm) to (300mm) 7 psi 13” (325mm) to (1200mm) 5 psi Over 40” (1200mm) 3 psi

Read more less

$0.01

Plug Safe | Right Angle Adaptor With 4 In Test Plug | PSBW-4PS

Plug Safe | Right Angle Adaptor With 4 In Test Plug External tightening test plug system The Plumboss Plug Safe system is an Australian-made solution designed to prevent losing test plugs down inspection openings while allowing tightening from outside the pipe. The zinc‑plated steel adaptor features a 200mm handle so the plug can be installed and tightened externally, keeping hands clear of the pipe and reducing the risk of cuts, abrasions and lost plugs. Using a screw and wedge mechanism, the Plug Safe system grips significantly tighter than standard hand tightening. Ideal for pipe stopping, pressure testing and maintenance work where inspection openings limit access inside the pipe. Operating Pressure Sizes This is a guide to the maximum back pressure for different types and sizes of test plugs. These pressures will vary depending on the cleanliness and condition of the pipe bore and the ambient temperature. ½” (12.5mm) to (30mm) 30 psi 1½” (40mm) to (300mm) 7 psi 13” (325mm) to (1200mm) 5 psi Over 40” (1200mm) 3 psi

Read more less

$0.01

Plumboss Dual Size Power Plunger 100mm & 150mm x 1200 Long | PP6S

Designed for heavy duty 4" and 6" plunging, these units utilise a solid galvanised bar and heavy duty rubber for the more serious plunging needs. Product Code Description PP6S POWER PLUNGER 1200mm X 4 & 6 inch PP6L POWER PLUNGER 1900mm X 4 & 6 inch

Read more less

$0.01

Dual Size Power Plunger 100mm & 150mm x 1900mm Long | PP6L

Dual-Size Power Plunger 150 x 1900mm Long Maximum reach and force for clearing tough blockages The Plumboss Power Plunger is designed for clearing stubborn drain blockages where reach and force are critical. Featuring a long 1900mm handle, it allows operators to apply strong, controlled pressure deep into pipework, making it ideal for sewer and stormwater applications. Built for heavy-duty use, the plunger utilises a solid galvanised steel bar and heavy-duty rubber heads to deliver powerful plunging action. The dual-size design (100mm and 150mm) provides versatility across 4" and 6" pipes, making it suitable for both domestic and commercial drain-clearing tasks. Product Code Description PP6S POWER PLUNGER 1200mm X 4 & 6 inch PP6L POWER PLUNGER 1900mm X 4 & 6 inch

Read more less

$0.01

Plumboss Stainless Poly Squeeze-off Tool | PESS01

Made in Australia from precision machined stainless steel and brass for smooth action & durability. Ideal for squeezing off poly gas & water lines. 0-32 mm capacity. Secured bottom bar. A must have tool for repair and emergency work.

Read more less

$0.01