Plumboss
-
FT Heavy Duty Shell Cutter 1 3/4 in- FTSC1750 | RD99138
Shell cutters cut up to 2" deep and fit most standard arbors. These shell cutters are recommended for cast and ductile iron, in use with Feed Tap machines. The attachment thread is 1/2 - 20. Each shell cutter tooth has carbide inserts which long outlast bi-metal teeth. CODE SHELL SIZE (inches) WEIGHT lbs kg FTSC688 11/16 0.09 0.04 FTSC875 7/8 0.15 0.07 FTSC1438 1 7/16 0.41 0.19 FTSC1750 1 3/4 0.57 0.26
$0.01
-
Ductile Iron Pipe Wrench 8 inch (200mm) - RW8 | RD02120
Heavy duty straight pipe wrench Straight pipe wrench for gripping and turning pipe. Designed for general pipe work applications. The high tensile ductile iron handle provides strength and durability under load. The adjustable jaw allows secure grip across a range of pipe sizes, supporting controlled turning during installation and maintenance. Pipe wrenches in this range: Item Code Pipe Capacity Length Weight Inches Nominal Actual Ø mm mm kg RD02120 1/8-1 10 - 33 203 0.5 RD01230 1/8-1 1/2 10 - 48 254 0.9 RD01240 1/8 - 2 10 - 60 305 1.3 RD02150 1/4 - 2 14 - 63 356 1.6 RD02160 1/4 - 2 1/2 14 - 75 457 2.8 RD02170 1/4 - 3 14 - 90 610 4.5 RD02180 1/4 - 5 14 - 141 914 7.1 RD02190 1 1/2 - 6 48 - 168 1219 14.9
$0.01
-
Field Pipe Vice 20 inch (500mm) - FPV20 | RD06027
Field Pipe Vice Holds pipe up to 20" (500mm) diameter. More pipe capacity and greater strength than others, yet weighs only 10kg without legs. Super choice for pre-trench work and above ground cuts. Tube for Legs and Backbone are sold Seperately.
$0.01
-
Guillotine Pipe Cutter 125-350mm - HPC12 | RD04612
Guillotine Pipe Cutters Robust Guillotine Pipe Cutters are designed to cut PE pipe thicker than SDR17 within 1/8" (3 mm) of square on medium and high-density pipe. HPC12 is designed for DIPS and IPS PE pipe from SDR17 to SDR9.3. Brass bushings in HPC12 crosshead feed assembly yield smooth feed and more consistent blade alignment. The accurate cuts from Reed Guillotine Cutters mean no facing is needed for electrofusion and only minimal facing for butt fusion joints. Durable, non-stick coated blade makes many square cuts with no chips to clog valves and small openings. Slight taper on blade allows an easy start to the cut, and holds form for a nice, straight cut. Blades are easy to sharpen or replace. NOTES: Reed strongly recommends use of the Grounding Accessory with Guillotine Cutters. Use a Grounding Accessory as a precaution against static build-up. Dissipate the charge and minimize the possibility of ignition. HPCs cut PE only and will not cut PVC or PP (polypropylene) pipe, such as Aquatherm. SPECIAL ORDER
$0.01
-
FT Heavy Duty Shell Cutter 11/16 in - FTSC688 | RD99132
Shell cutters cut up to 2" deep and fit most standard arbors. These shell cutters are recommended for cast and ductile iron, in use with Feed Tap machines. The attachment thread is 1/2 - 20. Each shell cutter tooth has carbide inserts which long outlast bi-metal teeth. CODE SHELL SIZE (inches) WEIGHT lbs kg FTSC688 11/16 0.09 0.04 FTSC875 7/8 0.15 0.07 FTSC1438 1 7/16 0.41 0.19 FTSC1750 1 3/4 0.57 0.26
$0.01
-
Guillotine Pipe Cutter - HPC8+ | RD04609
Manual, guillotine style cutter slices smoothly through PE. All aluminum construction results in greater rigidity and lighter tool with 22%+ weight reduction versus prior HPC8 model. Hinged latch opens to fit around pipe in the ditch. Greater pipe capacity, up to 9.06" O.D. (230 mm) fits true 8" DIPS and IPS for PE. Aluminum rails and crosshead have a hard anodized finish to reduce wear on sliding surfaces. Superior cuts with USA made blade.
$0.01
-
FT Heavy Duty Shell Cutter 7/8 in - FTSC875 | RD99134
Shell cutters cut up to 2" deep and fit most standard arbors. These shell cutters are recommended for cast and ductile iron, in use with Feed Tap machines. The attachment thread is 1/2 - 20. Each shell cutter tooth has carbide inserts which long outlast bi-metal teeth. CODE SHELL SIZE (inches) WEIGHT lbs kg FTSC688 11/16 0.09 0.04 FTSC875 7/8 0.15 0.07 FTSC1438 1 7/16 0.41 0.19 FTSC1750 1 3/4 0.57 0.26
$0.01
-
Hinged Cutter 4–6 inch for Steel and Stainless Steel - H6S | RD03130
Hinged pipe cutter for steel and stainless steel Hinged pipe cutter designed for steel and stainless steel pipe. The hinged design allows the cutter to wrap around the pipe, making it suitable for use in confined spaces where full rotation is not possible. Lighter than most manual pipe cutters, these hinged cutters track better for square cuts and require less clearance, while providing improved torque so cuts are made faster and with less effort. The cutter applies even pressure around the pipe circumference to achieve a clean cut. The hinged construction allows quick installation onto the pipe and efficient operation in trench or in-place applications. Hinged cutters in this range: Pipe Capacity Cast Iron / Ductile Iron Copper Steel / Stainless Steel Heavy Wall / Stainless Steel 1" – 2 1/2" (32 – 76 mm) - - RD03110 - 2" – 4" (60 – 125 mm) RD03122 - RD03120 - 4" – 6" (114 – 182 mm) RD03132 RD03130 RD03130 - 6" – 8" (168 – 240 mm) RD03142 RD03140 RD03140 - 8" – 12" (219 – 356 mm) RD03152 - RD03150 RD03154
$0.01
-
Hinged Cutter 6–8 inch for Steel and Stainless Steel - H8S | RD03140
Hinged pipe cutter for steel and stainless steel Hinged pipe cutter designed for steel and stainless steel pipe. The hinged design allows the cutter to wrap around the pipe, making it suitable for use in confined spaces where full rotation is not possible. Lighter than most manual pipe cutters, these hinged cutters track better for square cuts and require less clearance, while providing improved torque so cuts are made faster and with less effort. The cutter applies even pressure around the pipe circumference to achieve a clean cut. The hinged construction allows quick installation onto the pipe and efficient operation in trench or in-place applications. Hinged cutters in this range: Pipe Capacity Cast Iron / Ductile Iron Copper Steel / Stainless Steel Heavy Wall / Stainless Steel 1" – 2 1/2" (32 – 76 mm) - - RD03110 - 2" – 4" (60 – 125 mm) RD03122 - RD03120 - 4" – 6" (114 – 182 mm) RD03132 RD03130 RD03130 - 6" – 8" (168 – 240 mm) RD03142 RD03140 RD03140 - 8" – 12" (219 – 356 mm) RD03152 - RD03150 RD03154
$0.01
-
Hinged Cutter 1–2 1/2 inch for Stainless Steel | RD03110
Hinged pipe cutter for stainless steel Hinged pipe cutter designed for stainless steel pipe. The hinged design allows the cutter to wrap around the pipe, making it suitable for use in confined spaces where full rotation is not possible. Lighter than most manual pipe cutters, these hinged cutters track better for square cuts and require less clearance, while providing improved torque so cuts are made faster and with less effort. The cutter applies even pressure around the pipe circumference to achieve a clean cut. The hinged construction allows quick installation onto the pipe and efficient operation in trench or in-place applications. Hinged cutters in this range: Pipe Capacity Cast Iron / Ductile Iron Copper Steel / Stainless Steel Heavy Wall / Stainless Steel 1" – 2 1/2" (32 – 76 mm) - - RD03110 - 2" – 4" (60 – 125 mm) RD03122 - RD03120 - 4" – 6" (114 – 182 mm) RD03132 RD03130 RD03130 - 6" – 8" (168 – 240 mm) RD03142 RD03140 RD03140 - 8" – 12" (219 – 356 mm) RD03152 - RD03150 RD03154
$0.01
-
Hinged Cutter 2–4 inch for Steel and Stainless Steel - H4S | RD03120
Hinged pipe cutter for steel and stainless steel Hinged pipe cutter designed for steel and stainless steel pipe. The hinged design allows the cutter to wrap around the pipe, making it suitable for use in confined spaces where full rotation is not possible. Lighter than most manual pipe cutters, these hinged cutters track better for square cuts and require less clearance, while providing improved torque so cuts are made faster and with less effort. The cutter applies even pressure around the pipe circumference to achieve a clean cut. The hinged construction allows quick installation onto the pipe and efficient operation in trench or in-place applications. Hinged cutters in this range: Pipe Capacity Cast Iron / Ductile Iron Copper Steel / Stainless Steel Heavy Wall / Stainless Steel 1" – 2 1/2" (32 – 76 mm) - - RD03110 - 2" – 4" (60 – 125 mm) RD03122 - RD03120 - 4" – 6" (114 – 182 mm) RD03132 RD03130 RD03130 - 6" – 8" (168 – 240 mm) RD03142 RD03140 RD03140 - 8" – 12" (219 – 356 mm) RD03152 - RD03150 RD03154
$0.01
-
Internal Pipe Cutter 1 1/4 In Min - 10cm long | IC1S
Internal Pipe Cutter 1 1/4 In Min Compact internal cutting for tight access work The Plumboss Internal Pipe Cutter IC1S is designed for cutting pipe from the inside, making it ideal for tight access applications such as below floor level, inside walls, or within confined spaces. Its compact 10cm shaft allows precise cutting where traditional external cutters cannot reach. Fitted with a heat-treated saw tooth blade, the cutter delivers fast, aggressive cutting performance on plastic pipe, including PVC and ABS, as well as timber for applications such as sink lugs. Designed to be used with a standard drill, it provides a simple and efficient solution for plumbing and maintenance work. Code Description IC1A Internal Pipe Cutter 1 1/2" Minimum I.D Abrasive - 10cm Long IC1S Internal Pipe Cutter 1 1/4" Minimum I.D Saw - 10cm Long IC1SL Internal Pipe Cutter 1 1/4" Minimum I.D Saw - 18cm Long IC1RA Replacement Abrasive Blade IC1RD Replacement Diamond Blade IC1RS Replacement Saw Blade
$0.01
-
Hinged Cutter 8–12 inch for Steel and Stainless Steel - H12S | RD03150
Hinged pipe cutter for steel and stainless steel Hinged pipe cutter designed for steel and stainless steel pipe. The hinged design allows the cutter to wrap around the pipe, making it suitable for use in confined spaces where full rotation is not possible. Lighter than most manual pipe cutters, these hinged cutters track better for square cuts and require less clearance, while providing improved torque so cuts are made faster and with less effort. The cutter applies even pressure around the pipe circumference to achieve a clean cut. The hinged construction allows quick installation onto the pipe and efficient operation in trench or in-place applications. Hinged cutters in this range: Pipe Capacity Cast Iron / Ductile Iron Copper Steel / Stainless Steel Heavy Wall / Stainless Steel 1" – 2 1/2" (32 – 76 mm) - - RD03110 - 2" – 4" (60 – 125 mm) RD03122 - RD03120 - 4" – 6" (114 – 182 mm) RD03132 RD03130 RD03130 - 6" – 8" (168 – 240 mm) RD03142 RD03140 RD03140 - 8" – 12" (219 – 356 mm) RD03152 - RD03150 RD03154
$0.01
-
Internal Pipe Cutter Saw & Abrasive blade 18cm | IC1SL
The Plumboss Internal Pipe Cutter is designed for cutting pipe from the inside, making it ideal for situations where external access is limited. Perfect for trimming pipe below floor level, inside walls or in confined spaces, it allows clean, controlled cuts without the need for full pipe access. Equipped with a heat-treated steel saw tooth blade, the tool delivers fast and efficient cutting performance. An abrasive blade option is also included for applications where the cutter may come into contact with concrete or other hard materials, helping maintain performance and blade life in tougher conditions. Code Description IC1A Internal Pipe Cutter 1 1/2" Minimum I.D Abrasive - 10cm Long IC1S Internal Pipe Cutter 1 1/4" Minimum I.D Saw - 10cm Long IC1SL Internal Pipe Cutter 1 1/4" Minimum I.D Saw - 18cm Long IC1RA Replacement Abrasive Blade IC1RD Replacement Diamond Blade IC1RS Replacement Saw Blade
$0.01
-
Mini Cutter 1/8-5/8in (4-15mm) - MC1 | RD03470
Mini Cutter 1/8"-5/8" (4mm-15mm) MINI TUBE CUTTERS For use in extremely tight places, these tube cutters require minimal swing around the tubing. The MC1 features the smallest cutting radius in the industry and finer thread on screw for easier tightening. Suits aluminium, brass, copper and steel tube.
$0.01
-
Mini Cutter 1/8-15/16in (3-24mm) - MC2 | RD03490
Mini Cutter 1/8"-15/16" (3mm-24mm) MINI TUBE CUTTERS For use in extremely tight places, these tube cutters require minimal swing around the tubing. The heavy duty MC2 is the strongest mini cutter available. Larger, deeply knurled knob allows easier tightening. Suits aluminium, brass, copper and steel tube.
$0.01
-
Large Diameter Pipe Cutter 6-12in (160-335mm) - PLAS1 | RD04470
PLAS In-Line Rotary Cutters PLAS In–Line Rotary Cutters are excellent for cutting 4" to 12" (110 – 335 mm) diameter PVC or PE pipe in–trench or above ground. Each PLAS rotary cutter needs just 6" to 8" (153 – 203 mm) clearance around the pipe. Outboard rollers keep the cutter aligned on pipe, ensuring a square cut every time. The tool's carbide–tipped blades for PVC are long–lasting and penetrate up to a 2" wall thickness*. Each PVC cutter also can produce, in–line with the cut, a 15° bevel on both sides of the cut. In addition, a hardened, tool steel blade to cut PE pipe is available separately. The curved blade drives chips out of the way, making PE cuts much easier. *PLAS Cutter Specific Limitations for PE up to 14" pipe (355 mm) - 2" (51 mm) wall thickness up to 18" pipe (500 mm) - 1 1/2"(38 mm) wall thickness up to 28" pipe (800 mm) - 1" (25.4 mm) wall thickness CODE PIPE CAPACITY WEIGHT SECTIONS USED INCHES - NOMINAL ACTUAL Ø mm kg PB-PLAS0 4-8 110-240 17.7 A0, C0 PB-PLAS1 6-12 160-335 23.6 A, B, C PB-PLAS2 14-18 355-500 25.9 B, C (2), D PB-PLAS3 14-24 355-630 28.2 B, C (3), D PB-PLAS4 14-28 355-800 30.9 B, C (4), D
$0.01
-
PE Shut-Off Tool 3/4 & 1in (10 & 25mm) - PESO1 | RD04300
PE Water Service Shut-Off Tool is designed for emergency shut-off of PE water services. Front end of shut-off tool features a snap hinge device that can be taken apart quickly to allow work in confined areas. Knurled grip catches and holds the pipe. Open end has latch to hold tool closed until the repair is made. Shut-off tool is zinc-plated for corrosion resistance.
$0.01
-
Pipe Descaler 3-12 inch - DS12 | DS300
Wide, tough, flexible scraper that wraps around the pipe to remove scale, dirt, and corrosion quickly from the surface and allow more effective cutting, joining, gasket/valve seating or other operations. Pipe descalers are faster and more effective than chisels, chains or files and need only 2" of clearance around the pipe. Use pipe descalers to clean pipe before cutting, hot tapping or drilling. Roller handles allow smooth movement in use. Made entirely of zinc-plated steel for corrosion resistance and toughness. The scrapers are welded on for long life and can be sharpened. Stock Code Type Pipe Capacity Length Weight Inches - Nominal mm in mm lbs kg DS300 Steel 3 -12 70 - 300 32 810 5.7 2.6 DS900 Steel 3 - 36 70 - 910 44 1110 8.2 3.7
$0.01
-
PE Poly Pipe Peeler/Scraper 7" - PEPEEL6 | RD04631
Features One tool covers a range of PE pipe from 1 1/2”- 7” nominal IPS (48-180 mm actual O.D.). Creates a uniformly peeled surface. Works well even on out-of-round pipe. Requires 5 1/2" turning clearance around pipe.
$0.01
-
PE Squeeze Off Tool 1/2-2in (15-50mm) - PES2CTS | RD04304
Best designed tools for stopping flow in 1/2" up to 2" PE pipe. Different models handle a wide range of pipe sizes and applications. Sliding bar handles make work in tight places easier and increase leverage for tightening. Fine-pitched thread on feed screw allows for a controlled, low-effort squeeze. Grease fittings at friction points make operation smoother and extend tool life. Aluminum bars are anodized or painted for protection from the elements. All PE squeeze-off tools use positive stops to prevent damage caused by over-clamping. Multiple size/SDR settings on one pair of stops provide quick, convenient over-squeeze protection for standard pipe sizes.NOTE We strongly recommends use of the PEGR Grounding Accessory with PE Squeeze-Off Tools. Use a grounding accessory as a precaution against static build-up. Dissipate the charge and minimize the possibility of ignition.
$0.01
-
Pipe Descaler 3-36 inch DS36 | DS900
Wide, tough, flexible scraper that wraps around the pipe to remove scale, dirt, and corrosion quickly from the surface and allow more effective cutting, joining, gasket/valve seating or other operations. Pipe descalers are faster and more effective than chisels, chains or files and need only 2" of clearance around the pipe. Use pipe descalers to clean pipe before cutting, hot tapping or drilling. Roller handles allow smooth movement in use. Made entirely of zinc-plated steel for corrosion resistance and toughness. The scrapers are welded on for long life and can be sharpened. Stock Code Type Pipe Capacity Length Weight Inches - Nominal mm in mm lbs kg DS300 Steel 3 -12 70 - 300 32 810 5.7 2.6 DS900 Steel 3 - 36 70 - 910 44 1110 8.2 3.7
$0.01
-
PJ414 - Multi Purpose Pipe Joiner 4-14 inch | RD08080
Multi Purpose Pipe Joiner 4"-14" (102mm-355mm) PJ414 Multi–Purpose Pipe Joiner allows a basic lever–and–chain approach to joining medium and large gasketed pipe and fittings up to 14" size. It works for PVC, ductile iron, clay tile, cast iron soil pipe and concrete pipe. Use two PJ414’s for heavier pipe. Quarter–inch proof coil chain is rated at 1600 lbs (727 kg). PJ414 pipe joiner comes complete with two 12’ (3.7 m) lengths of chain, two grab hooks, plus a two–piece extendable handle of over 4 feet that allows for a variety of applications.
$0.01
-
Plastic Pipe Beveller 1 1/2 -8in - BT1 | RD04395
With a strong aluminum alloy frame, effective roller locking, and good tool life, a BT2 beveller produces a smooth 15° bevel on all types of plastic pipe, including gasketed PVC and C900 PVC in about one minute. Depending on wall thickness, the bevel can be up to 1 1/2" long. Beveler is easily adjusted for different pipe sizes and thicknesses, with no part changes. Bevel blade can be sharpened or replaced.NOTE if pipe is not stationary, a pipe vise is recommended. Code Item No. Pipe Capacity Weight Inches Nominal Actual Ø mm lbs kg BT1 04395 1 1/2 - 8 40 - 200 3.0 1.4 BT2 04398 1 1/2 - 12 40 - 300 6.1 2.8
$0.01
You have seen 480 out of 647 products