Products
-
Drill Bit 15/16 inch D Series - D938 | RD04382
D Series Drill Bits are designed for use with Reed drilling machines and Mueller E5/D5 only both of which use saddles. These spiral drill bits are made from strong, high-speed steel, and are heat-treated for longer life. They are black-oxide coated for corrosion resistance, and are much easier cutting than other drills as the spiral motion clears chips away from the cut. D series drill bits are recommended for cast iron and ductile iron, including cement-lined ductile iron. CODE DRILL SIZE (inches) WEIGHT lbs kg D688 11/16 0.3 0.1 D875 7/8 0.5 0.2 D938 15/16 0.6 0.3
$0.01
-
$0.01
-
Drill Bit 7/8 inch D Series - D875 | RD04381
D Series Drill Bits are designed for use with Reed drilling machines and Mueller E5/D5 only both of which use saddles. These spiral drill bits are made from strong, high-speed steel, and are heat-treated for longer life. They are black-oxide coated for corrosion resistance, and are much easier cutting than other drills as the spiral motion clears chips away from the cut. D series drill bits are recommended for cast iron and ductile iron, including cement-lined ductile iron. CODE DRILL SIZE (inches) WEIGHT lbs kg D688 11/16 0.3 0.1 D875 7/8 0.5 0.2 D938 15/16 0.6 0.3
$0.01
-
Drill Powered Hydrostatic Test Pump Export - DPHTP500E | RD08179
Drill Powered Hydrostatic Test Pump Power Source - Drill powered (drill not included) Inlet 3/4 inch GHT - Outlet 1/2 inch NPSM Max capacity psi 500 - bar 34 The separate drill power source keeps weight off the pump, making it lightweight and portable. Works on commercial and residential water systems. Pumps are self-priming and work with pressurized or non-pressurized water supply. Storage case keeps the pump clean and organized. No drop cord needed when used with a cordless drill. Requires 18V cordless or ½inch corded drill with 1500 RPM (not included).
$0.01
-
Dual Size Power Plunger 100mm & 150mm x 1900mm Long | PP6L
Dual-Size Power Plunger 150 x 1900mm Long Maximum reach and force for clearing tough blockages The Plumboss Power Plunger is designed for clearing stubborn drain blockages where reach and force are critical. Featuring a long 1900mm handle, it allows operators to apply strong, controlled pressure deep into pipework, making it ideal for sewer and stormwater applications. Built for heavy-duty use, the plunger utilises a solid galvanised steel bar and heavy-duty rubber heads to deliver powerful plunging action. The dual-size design (100mm and 150mm) provides versatility across 4" and 6" pipes, making it suitable for both domestic and commercial drain-clearing tasks. Product Code Description PP6S POWER PLUNGER 1200mm X 4 & 6 inch PP6L POWER PLUNGER 1900mm X 4 & 6 inch
$0.01
-
Ductile Iron Pipe Wrench 10 inch (250mm) - RW10 | RD02130
Heavy duty straight pipe wrench Straight pipe wrench for gripping and turning pipe. Designed for general pipe work applications. The high tensile ductile iron handle provides strength and durability under load. The adjustable jaw allows secure grip across a range of pipe sizes, supporting controlled turning during installation and maintenance. Pipe wrenches in this range: Item Code Pipe Capacity Length Weight Inches Nominal Actual Ø mm mm kg RD02120 1/8-1 10 - 33 203 0.5 RD01230 1/8-1 1/2 10 - 48 254 0.9 RD01240 1/8 - 2 10 - 60 305 1.3 RD02150 1/4 - 2 14 - 63 356 1.6 RD02160 1/4 - 2 1/2 14 - 75 457 2.8 RD02170 1/4 - 3 14 - 90 610 4.5 RD02180 1/4 - 5 14 - 141 914 7.1 RD02190 1 1/2 - 6 48 - 168 1219 14.9
$0.01
-
Ductile Iron Pipe Wrench 12 inch (300mm) - RW12 | RD02140
Heavy duty straight pipe wrench Straight pipe wrench for gripping and turning pipe. Designed for general pipe work applications. The high tensile ductile iron handle provides strength and durability under load. The adjustable jaw allows secure grip across a range of pipe sizes, supporting controlled turning during installation and maintenance. Pipe wrenches in this range: Item Code Pipe Capacity Length Weight Inches Nominal Actual Ø mm mm kg RD02120 1/8-1 10 - 33 203 0.5 RD01230 1/8-1 1/2 10 - 48 254 0.9 RD01240 1/8 - 2 10 - 60 305 1.3 RD02150 1/4 - 2 14 - 63 356 1.6 RD02160 1/4 - 2 1/2 14 - 75 457 2.8 RD02170 1/4 - 3 14 - 90 610 4.5 RD02180 1/4 - 5 14 - 141 914 7.1 RD02190 1 1/2 - 6 48 - 168 1219 14.9
$0.01
-
Ductile Iron Pipe Wrench 14 inch (350mm) - RW14 | RD02150
Heavy duty straight pipe wrench Straight pipe wrench for gripping and turning pipe. Designed for general pipe work applications. The high tensile ductile iron handle provides strength and durability under load. The adjustable jaw allows secure grip across a range of pipe sizes, supporting controlled turning during installation and maintenance. Pipe wrenches in this range: Item Code Pipe Capacity Length Weight Inches Nominal Actual Ø mm mm kg RD02120 1/8-1 10 - 33 203 0.5 RD01230 1/8-1 1/2 10 - 48 254 0.9 RD01240 1/8 - 2 10 - 60 305 1.3 RD02150 1/4 - 2 14 - 63 356 1.6 RD02160 1/4 - 2 1/2 14 - 75 457 2.8 RD02170 1/4 - 3 14 - 90 610 4.5 RD02180 1/4 - 5 14 - 141 914 7.1 RD02190 1 1/2 - 6 48 - 168 1219 14.9
$0.01
-
Ductile Iron Pipe Wrench 18 inch (450mm) - RW18 | RD02160
Heavy duty straight pipe wrench This Heavy Duty Straight Pipe Wrench is designed for gripping and turning pipe in demanding plumbing, civil and mechanical applications. Built for trade use, it delivers strong, reliable torque and secure grip across a wide range of pipe sizes. Manufactured with a high-tensile ductile iron handle and hardened alloy steel components, this wrench is engineered to withstand heavy loads and repeated use on site. The straight pipe wrench design provides dependable performance for tightening and loosening pipe, fittings and threaded connections. Pipe wrenches in this range: Item Code Pipe Capacity Length Weight Inches Nominal Actual Ø mm mm kg RD02120 1/8-1 10 - 33 203 0.5 RD01230 1/8-1 1/2 10 - 48 254 0.9 RD01240 1/8 - 2 10 - 60 305 1.3 RD02150 1/4 - 2 14 - 63 356 1.6 RD02160 1/4 - 2 1/2 14 - 75 457 2.8 RD02170 1/4 - 3 14 - 90 610 4.5 RD02180 1/4 - 5 14 - 141 914 7.1 RD02190 1 1/2 - 6 48 - 168 1219 14.9
$0.01
-
Ductile Iron Pipe Wrench 24 inch (600mm) - RW24 | RD02170
Heavy duty straight pipe wrench Straight pipe wrench for gripping and turning pipe. Designed for general pipe work applications. The high tensile ductile iron handle provides strength and durability under load. The adjustable jaw allows secure grip across a range of pipe sizes, supporting controlled turning during installation and maintenance. Pipe wrenches in this range: Item Code Pipe Capacity Length Weight Inches Nominal Actual Ø mm mm kg RD02120 1/8-1 10 - 33 203 0.5 RD01230 1/8-1 1/2 10 - 48 254 0.9 RD01240 1/8 - 2 10 - 60 305 1.3 RD02150 1/4 - 2 14 - 63 356 1.6 RD02160 1/4 - 2 1/2 14 - 75 457 2.8 RD02170 1/4 - 3 14 - 90 610 4.5 RD02180 1/4 - 5 14 - 141 914 7.1 RD02190 1 1/2 - 6 48 - 168 1219 14.9
$0.01
-
Ductile Iron Pipe Wrench 36 inch (900mm) - RW36 | RD02180
Heavy duty straight pipe wrench Straight pipe wrench for gripping and turning pipe. Designed for general pipe work applications. The high tensile ductile iron handle provides strength and durability under load. The adjustable jaw allows secure grip across a range of pipe sizes, supporting controlled turning during installation and maintenance. Pipe wrenches in this range: Item Code Pipe Capacity Length Weight Inches Nominal Actual Ø mm mm kg RD02120 1/8-1 10 - 33 203 0.5 RD01230 1/8-1 1/2 10 - 48 254 0.9 RD01240 1/8 - 2 10 - 60 305 1.3 RD02150 1/4 - 2 14 - 63 356 1.6 RD02160 1/4 - 2 1/2 14 - 75 457 2.8 RD02170 1/4 - 3 14 - 90 610 4.5 RD02180 1/4 - 5 14 - 141 914 7.1 RD02190 1 1/2 - 6 48 - 168 1219 14.9
$0.01
-
Ductile Iron Pipe Wrench 48 inch (1200mm) - RW48 | RD02190
Heavy duty straight pipe wrench Straight pipe wrench for gripping and turning pipe. Designed for general pipe work applications. The high tensile ductile iron handle provides strength and durability under load. The adjustable jaw allows secure grip across a range of pipe sizes, supporting controlled turning during installation and maintenance. Pipe wrenches in this range: Item Code Pipe Capacity Length Weight Inches Nominal Actual Ø mm mm kg RD02120 1/8-1 10 - 33 203 0.5 RD01230 1/8-1 1/2 10 - 48 254 0.9 RD01240 1/8 - 2 10 - 60 305 1.3 RD02150 1/4 - 2 14 - 63 356 1.6 RD02160 1/4 - 2 1/2 14 - 75 457 2.8 RD02170 1/4 - 3 14 - 90 610 4.5 RD02180 1/4 - 5 14 - 141 914 7.1 RD02190 1 1/2 - 6 48 - 168 1219 14.9
$0.01
-
Ductile Iron Pipe Wrench 8 inch (200mm) - RW8 | RD02120
Heavy duty straight pipe wrench Straight pipe wrench for gripping and turning pipe. Designed for general pipe work applications. The high tensile ductile iron handle provides strength and durability under load. The adjustable jaw allows secure grip across a range of pipe sizes, supporting controlled turning during installation and maintenance. Pipe wrenches in this range: Item Code Pipe Capacity Length Weight Inches Nominal Actual Ø mm mm kg RD02120 1/8-1 10 - 33 203 0.5 RD01230 1/8-1 1/2 10 - 48 254 0.9 RD01240 1/8 - 2 10 - 60 305 1.3 RD02150 1/4 - 2 14 - 63 356 1.6 RD02160 1/4 - 2 1/2 14 - 75 457 2.8 RD02170 1/4 - 3 14 - 90 610 4.5 RD02180 1/4 - 5 14 - 141 914 7.1 RD02190 1 1/2 - 6 48 - 168 1219 14.9
$0.01
-
Ductile Iron Pipe Wrench Offset 10 inch (250mm) - RWO10 | RD02220
Heavy duty offset pipe wrench This Offset Pipe Wrench is designed for gripping and turning pipe in hard-to-reach areas. The 45° offset head provides longer swing and improved access when working around installed pipework. Reed pipe wrenches are built with a high-tensile ductile iron handle and hardened alloy steel components to withstand heavy demands. The offset design provides improved control and efficiency when tightening and loosening pipe and fittings. 45° offset pipe wrench range: Catalog No Item Code Pipe Capacity Length Weight Inches Nominal Actual Ø mm in mm lbs kg RWO8 RD02210 1/8" – 1 10 - 33 8 203 0.8 0.4 RWO10 RD02220 1/8 - 1 1/2 10 - 48 10 254 1.7 0.8 RWO14 RD02230 1/4 - 2 14 - 63 14 356 3.5 1.6
$0.01
-
Ductile Iron Pipe Wrench Offset 8 inch (200mm) - RWO8 | RD02210
Heavy duty offset pipe wrench The Offset Pipe Wrench is designed for gripping and turning pipe in hard-to-reach areas. The 45° offset head provides longer swing and improved access when working around installed pipework. Reed pipe wrenches feature a high-tensile ductile iron handle and hardened alloy steel components designed to withstand heavy demands. The offset design provides improved access and control when tightening and loosening pipe and fittings. 45° offset pipe wrench range: Catalog No Item Code Pipe Capacity Length Weight Inches Nominal Actual Ø mm in mm lbs kg RWO8 RD02210 1/8" – 1 10 - 33 8 203 0.8 0.4 RWO10 RD02220 1/8 - 1 1/2 10 - 48 10 254 1.7 0.8 RWO14 RD02230 1/4 - 2 14 - 63 14 356 3.5 1.6
$0.01
-
Electric Hydrostatic Test Pump 220V - EHTP500E | RD08171
Smooth running, quiet 3/4 hp motor. Electric pump includes a 15' (46m) high pressure hose for filling the system. Pumps are self-priming and work with pressurized or non-pressurized water supply. Test water meters, plumbing lines, pressure vessels, solar systems and sprinkler systems. Output pressure adjusts easily.
$0.01
-
ExactCUT 170E PipeCut 15–170mm | PEC170E
ExactCUT 170E PipeCut 15–170mm Precision pipe cutting system for fast, safe and burr-free results across all materials The Plumboss exactCUT 170E PipeCut is a professional-grade pipe cutting system designed to cut steel, stainless steel, cast iron, copper, plastic and multilayer pipes with speed, accuracy and consistency. It securely clamps onto the pipe and maintains alignment throughout the cut, eliminating the inconsistencies and manual effort associated with grinders and traditional cutting methods. Unlike abrasive cutting, the exactCUT system chips through material to produce clean, straight and burr-free ends ready for immediate jointing. This reduces rework on-site while improving installation speed and overall finish quality. The spark-free cutting process and minimal dust generation also improve safety, making it suitable for indoor and fire-sensitive environments. Built for trade efficiency, the 170E is lightweight at 5.7kg and requires minimal working space, with the machine supported directly on the pipe during operation. This improves control, reduces operator fatigue and allows for stable cutting in tight or confined areas. Adjustable blade speed and torque control ensure optimal performance across different materials and wall thicknesses. With a cutting capacity from 15mm to 170mm, the exactCUT 170E replaces multiple cutting tools with one system. It is engineered to improve workflow, safety and precision across plumbing, mechanical and civil applications where clean, repeatable results are critical. Included Components PipeCut 170E machine Pipe supports (4 pcs) TCT 140 blade Carry bag Hex socket keys (5mm & 2mm) Operating instructions exactCUT Pipe Cutting Training Video
$0.01
-
exactCUT 360PRO PipeCut 75–360mm | PEC360PRO
exactCUT 360PRO PipeCut 75–360mm Heavy-duty pipe cutting system for large diameter pipe with precision, power and safety The Plumboss exactCUT 360PRO PipeCut is engineered for heavy-duty pipe cutting across steel, stainless steel, cast iron, ductile iron, copper, plastic and multilayer materials, delivering fast, straight and repeatable results on large diameter pipe. Designed for professional use, it provides a controlled, clamped cutting system that eliminates the inaccuracies, sparks and manual handling associated with grinders and traditional cutting methods. With a wide cutting capacity from 75mm to 360mm, the 360PRO is purpose-built for larger pipe applications across plumbing, mechanical and civil work. The system mounts quickly onto the pipe and maintains alignment throughout the cut, ensuring clean, accurate and burr-free finishes ready for immediate installation. Its ability to handle wall thicknesses up to 20mm steel and up to 45mm plastics makes it a versatile solution for demanding site conditions. Powered by a high-performance 2500W motor, the 360PRO delivers consistent cutting power across all compatible materials. Integrated electronics including soft start, torque control and overload protection safeguard both the tool and operator, while the built-in “traffic light” guidance system assists in maintaining optimal cutting speed. A laser indicator further improves accuracy by clearly defining the cutting line before and during operation. Despite its heavy-duty capability, the system remains portable and user-friendly, with fast setup and minimal working space required. The pipe-supported design improves stability and control while significantly reducing operator fatigue during extended use. Spark reduction and controlled cutting action improve on-site safety, making it suitable for indoor and high-risk environments where traditional cutting methods are limited. As part of the Pro Series range, the exactCUT 360PRO is built for professionals who require high output, precision and reliability. It replaces multiple cutting tools with one system and can be upgraded with additional accessories such as cut and bevel packages, making it a scalable solution for large-scale pipe installation work. The pack includes PipeCut 360PRO machine Pipe supports (1 x double, 2 x small) TCT 165 blade (fitted) Hex socket keys (5mm & 2mm, fitted) Operating instructions exactCUT Training Pipe Cutting Video
$0.01
-
exactCUT ALU 140 Blade | PB-P7048109
Blade with tungsten carbide tips (TCT). Designed especially for cutting aluminum. TCT tip blades can be sharpened a couple of times so they will become like new.
$0.01
-
exactCUT ALU/ Plastics 180 Blade | PB-P70104505
exactCUT ALU/ Plastics 180 Blade | PB-P70104505
$0.01
-
exactCUT Bevel Head 30° | PB-P7048130
Compulsory accessory for Exact PipeBevel 220E and 360E beveling machines. Exact cutting head is supplied separately, as there are three different options available to choose from (the most used bevel angles 30°, 37.5° and 45°). Available in three options Exact cutting head is supplied separately from the PipeBevel 220E/360E, as there are three different options available to choose from: • 30°• 37.5°• 45° As per your needs, you will have to choose at least one of the mentioned options for your PipeBevel 220E/360E. Also the Exact Bevel Tips must be ordered separately, as those are not included in the default content. The cutting head has 3 cutting tips, each of them having 4 cutting edges to rotate once becoming blunt. Thanks to this, you will have a prolonged beveller blade tip life.
$0.01
-
exactCUT Bevel Head 37.5° | PB-P7048123
Compulsory accessory for Exact PipeBevel 220E and 360E beveling machines. Exact cutting head is supplied separately, as there are three different options available to choose from (the most used bevel angles 30°, 37.5° and 45°). Available in three options Exact cutting head is supplied separately from the PipeBevel 220E/360E, as there are three different options available to choose from: • 30°• 37.5°• 45° As per your needs, you will have to choose at least one of the mentioned options for your PipeBevel 220E/360E. Also the Exact Bevel Tips must be ordered separately, as those are not included in the default content. The cutting head has 3 cutting tips, each of them having 4 cutting edges to rotate once becoming blunt. Thanks to this, you will have a prolonged beveller blade tip life.
$0.01
-
exactCUT Bevel Head 45° | PB-P7048131
Compulsory accessory for Exact PipeBevel 220E and 360E beveling machines. Exact cutting head is supplied separately, as there are three different options available to choose from (the most used bevel angles 30°, 37.5° and 45°). Available in three options Exact cutting head is supplied separately from the PipeBevel 220E/360E, as there are three different options available to choose from: • 30°• 37.5°• 45° As per your needs, you will have to choose at least one of the mentioned options for your PipeBevel 220E/360E. Also the Exact Bevel Tips must be ordered separately, as those are not included in the default content. The cutting head has 3 cutting tips, each of them having 4 cutting edges to rotate once becoming blunt. Thanks to this, you will have a prolonged beveller blade tip life.
$0.01
-
exactCUT Bevel Tip (Stainless) 3 pce | PB-P70104504
Necessary accessory for exactCUT Cut & Bevel 220E and 360E beveling machines, or more specifically, for the Exact Cutting Head. Exact PipeBevel Tip comes in a set of 3 pcs that are intended for all the slots of Exact Cutting Head. The tips are suitable on all different options of cutting head (30°, 37.5° and 45°). Each bevel tip has 4 cutting edges to rotate once becoming blunt. Thanks to this, you will have a prolonged beveller blade tip life.
$0.01
You have seen 120 out of 756 products